17-4 PH Precipitation Hardening Stainless (Condition H900 / 40 HRC) — 1/8" (0.125 in) 4-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 17-4 PH Precipitation Hardening Stainless (Condition H900 / 40 HRC) with a 1/8" (0.125 in) 4-flute TiAlN carbide end mill, the recommended spindle speed is 11,028 RPM at 110 m/min (360.9 SFM), with a profiling feed rate of 450 mm/min (17.6 IPM) and adjusted chip load of 0.0102 mm/tooth, achieving a material removal rate of 1.69 cm³/min (0.1 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math17-4 PH Precipitation Hardening Stainless (Condition H900 / 40 HRC) (1/8" (0.125 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 3.17 mm | 1.59 mm | 1× | 146 | 5.7 | 0.74 | 0.04 |
| Slotting (100% WOC) | 3F | 3.17 mm | 1.59 mm | 1× | 218 | 8.6 | 1.1 | 0.06 |
| Slotting (100% WOC) | 4F | 3.17 mm | 1.59 mm | 1× | 291 | 11.5 | 1.47 | 0.08 |
| Profiling / HEM (25% WOC) | 2F | 0.79 mm | 4.76 mm | 1.1565× | 225 | 8.8 | 0.85 | 0.05 |
| Profiling / HEM (25% WOC) | 3F | 0.79 mm | 4.76 mm | 1.1565× | 337 | 13.2 | 1.27 | 0.07 |
| Profiling / HEM (25% WOC) CURRENT | 4F | 0.79 mm | 4.76 mm | 1.1565× | 450 | 17.6 | 1.69 | 0.09 |
| Adaptive Clearing (10% WOC) | 2F | 0.32 mm | 6.35 mm | 1.6609× | 322 | 12.6 | 0.65 | 0.04 |
| Adaptive Clearing (10% WOC) | 3F | 0.32 mm | 6.35 mm | 1.6609× | 483 | 18.9 | 0.98 | 0.05 |
| Adaptive Clearing (10% WOC) | 4F | 0.32 mm | 6.35 mm | 1.6609× | 644 | 25.1 | 1.31 | 0.07 |
Shop-Floor Machining Strategy for 17-4 PH Precipitation Hardening Stainless (Condition H900 / 40 HRC)
Work Hardening: HighHigh-Pressure Flood Coolant with Synthetic Water-Soluble Fluid
Pressure: 30 to 70 bar
Heat dissipation from the shear zone prevents thermal tempering and edge fatigue.
Chip Flow: Crisp, tight curled chips; high cutting forces generated.
Milling Direction: Always climb mill.
- In H900 condition, tool rigidity and low runout (<0.005 mm) are required to avoid chipped flutes.
- Use thick-core end mills designed for hardened steels (4-5 flutes).
- Trochoidal / dynamic milling with light radial engagement (6-10%) increases tool life by 300%.
Frequently Asked CNC Questions (17-4 PH Precipitation Hardening Stainless (Condition H900 / 40 HRC) / 1/8" (0.125 in))
What is the recommended RPM for milling 17-4 PH Precipitation Hardening Stainless (Condition H900 / 40 HRC) with a 1/8" (0.125 in) end mill?
What table feed rate and chip load should I program for 1/8" (0.125 in) in 17-4 PH Precipitation Hardening Stainless (Condition H900 / 40 HRC)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 17-4 PH Precipitation Hardening Stainless (Condition H900 / 40 HRC)?
Recent Calculations
No recent calculations saved yet.