17-4 PH Precipitation Hardening Stainless (Condition H900 / 40 HRC) — 12 mm 4-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 17-4 PH Precipitation Hardening Stainless (Condition H900 / 40 HRC) with a 12 mm 4-flute TiAlN carbide end mill, the recommended spindle speed is 2,918 RPM at 110 m/min (360.9 SFM), with a profiling feed rate of 345 mm/min (13.7 IPM) and adjusted chip load of 0.0296 mm/tooth, achieving a material removal rate of 18.63 cm³/min (1.15 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math17-4 PH Precipitation Hardening Stainless (Condition H900 / 40 HRC) (12 mm) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 12 mm | 6 mm | 1× | 112 | 4.4 | 8.06 | 0.44 |
| Slotting (100% WOC) | 3F | 12 mm | 6 mm | 1× | 168 | 6.7 | 12.1 | 0.66 |
| Slotting (100% WOC) | 4F | 12 mm | 6 mm | 1× | 224 | 8.9 | 16.13 | 0.87 |
| Profiling / HEM (25% WOC) | 2F | 3 mm | 18 mm | 1.1547× | 173 | 6.8 | 9.34 | 0.51 |
| Profiling / HEM (25% WOC) | 3F | 3 mm | 18 mm | 1.1547× | 259 | 10.2 | 13.99 | 0.76 |
| Profiling / HEM (25% WOC) CURRENT | 4F | 3 mm | 18 mm | 1.1547× | 345 | 13.7 | 18.63 | 1.01 |
| Adaptive Clearing (10% WOC) | 2F | 1.2 mm | 24 mm | 1.6667× | 249 | 9.8 | 7.17 | 0.39 |
| Adaptive Clearing (10% WOC) | 3F | 1.2 mm | 24 mm | 1.6667× | 374 | 14.7 | 10.77 | 0.58 |
| Adaptive Clearing (10% WOC) | 4F | 1.2 mm | 24 mm | 1.6667× | 498 | 19.6 | 14.34 | 0.78 |
Shop-Floor Machining Strategy for 17-4 PH Precipitation Hardening Stainless (Condition H900 / 40 HRC)
Work Hardening: HighHigh-Pressure Flood Coolant with Synthetic Water-Soluble Fluid
Pressure: 30 to 70 bar
Heat dissipation from the shear zone prevents thermal tempering and edge fatigue.
Chip Flow: Crisp, tight curled chips; high cutting forces generated.
Milling Direction: Always climb mill.
- In H900 condition, tool rigidity and low runout (<0.005 mm) are required to avoid chipped flutes.
- Use thick-core end mills designed for hardened steels (4-5 flutes).
- Trochoidal / dynamic milling with light radial engagement (6-10%) increases tool life by 300%.
Frequently Asked CNC Questions (17-4 PH Precipitation Hardening Stainless (Condition H900 / 40 HRC) / 12 mm)
What is the recommended RPM for milling 17-4 PH Precipitation Hardening Stainless (Condition H900 / 40 HRC) with a 12 mm end mill?
What table feed rate and chip load should I program for 12 mm in 17-4 PH Precipitation Hardening Stainless (Condition H900 / 40 HRC)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 17-4 PH Precipitation Hardening Stainless (Condition H900 / 40 HRC)?
Recent Calculations
No recent calculations saved yet.