316 Marine Grade Stainless Steel (with Molybdenum) — 10 mm 4-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 316 Marine Grade Stainless Steel (with Molybdenum) with a 10 mm 4-flute TiAlN carbide end mill, the recommended spindle speed is 3,979 RPM at 125 m/min (410.1 SFM), with a profiling feed rate of 441 mm/min (17.3 IPM) and adjusted chip load of 0.0277 mm/tooth, achieving a material removal rate of 16.54 cm³/min (1.01 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math316 Marine Grade Stainless Steel (with Molybdenum) (10 mm) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 10 mm | 5 mm | 1× | 143 | 5.7 | 7.15 | 0.34 |
| Slotting (100% WOC) | 3F | 10 mm | 5 mm | 1× | 215 | 8.5 | 10.75 | 0.52 |
| Slotting (100% WOC) | 4F | 10 mm | 5 mm | 1× | 286 | 11.3 | 14.3 | 0.69 |
| Profiling / HEM (25% WOC) | 2F | 2.5 mm | 15 mm | 1.1547× | 220 | 8.7 | 8.25 | 0.4 |
| Profiling / HEM (25% WOC) | 3F | 2.5 mm | 15 mm | 1.1547× | 331 | 13 | 12.41 | 0.59 |
| Profiling / HEM (25% WOC) CURRENT | 4F | 2.5 mm | 15 mm | 1.1547× | 441 | 17.3 | 16.54 | 0.79 |
| Adaptive Clearing (10% WOC) | 2F | 1 mm | 20 mm | 1.6667× | 318 | 12.5 | 6.36 | 0.3 |
| Adaptive Clearing (10% WOC) | 3F | 1 mm | 20 mm | 1.6667× | 477 | 18.7 | 9.54 | 0.46 |
| Adaptive Clearing (10% WOC) | 4F | 1 mm | 20 mm | 1.6667× | 637 | 25 | 12.74 | 0.61 |
Shop-Floor Machining Strategy for 316 Marine Grade Stainless Steel (with Molybdenum)
Work Hardening: EXTREMEHeavy Flood Coolant with Extreme Pressure (EP) Additives
Pressure: 20 bar minimum
Molybdenum addition increases chemical and high-temp shear toughness, requiring superior lubricity.
Chip Flow: High tendency for chips to weld to cutting edges if feed pauses.
Milling Direction: Mandatory climb milling.
- Reduce SFM by 10-15% compared to 304 stainless; keep chip load firm.
- Corner chamfer or radiused cutters prevent premature notch wear on the depth-of-cut line.
- Use high-feed milling or trochoidal toolpaths to spread wear along the full flute length.
Frequently Asked CNC Questions (316 Marine Grade Stainless Steel (with Molybdenum) / 10 mm)
What is the recommended RPM for milling 316 Marine Grade Stainless Steel (with Molybdenum) with a 10 mm end mill?
What table feed rate and chip load should I program for 10 mm in 316 Marine Grade Stainless Steel (with Molybdenum)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 316 Marine Grade Stainless Steel (with Molybdenum)?
Recent Calculations
No recent calculations saved yet.