316 Marine Grade Stainless Steel (with Molybdenum) — 3/4" (0.750 in) 4-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 316 Marine Grade Stainless Steel (with Molybdenum) with a 3/4" (0.750 in) 4-flute TiAlN carbide end mill, the recommended spindle speed is 2,089 RPM at 125 m/min (410.1 SFM), with a profiling feed rate of 388 mm/min (15.3 IPM) and adjusted chip load of 0.0464 mm/tooth, achieving a material removal rate of 52.78 cm³/min (3.23 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math316 Marine Grade Stainless Steel (with Molybdenum) (3/4" (0.750 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 19.05 mm | 9.53 mm | 1× | 126 | 5 | 22.87 | 1.1 |
| Slotting (100% WOC) | 3F | 19.05 mm | 9.53 mm | 1× | 189 | 7.5 | 34.31 | 1.64 |
| Slotting (100% WOC) | 4F | 19.05 mm | 9.53 mm | 1× | 252 | 9.9 | 45.75 | 2.19 |
| Profiling / HEM (25% WOC) | 2F | 4.76 mm | 28.58 mm | 1.1549× | 194 | 7.6 | 26.39 | 1.26 |
| Profiling / HEM (25% WOC) | 3F | 4.76 mm | 28.58 mm | 1.1549× | 291 | 11.5 | 39.59 | 1.9 |
| Profiling / HEM (25% WOC) CURRENT | 4F | 4.76 mm | 28.58 mm | 1.1549× | 388 | 15.3 | 52.78 | 2.53 |
| Adaptive Clearing (10% WOC) | 2F | 1.91 mm | 38.1 mm | 1.6647× | 280 | 11 | 20.38 | 0.98 |
| Adaptive Clearing (10% WOC) | 3F | 1.91 mm | 38.1 mm | 1.6647× | 419 | 16.5 | 30.49 | 1.46 |
| Adaptive Clearing (10% WOC) | 4F | 1.91 mm | 38.1 mm | 1.6647× | 559 | 22 | 40.68 | 1.95 |
Shop-Floor Machining Strategy for 316 Marine Grade Stainless Steel (with Molybdenum)
Work Hardening: EXTREMEHeavy Flood Coolant with Extreme Pressure (EP) Additives
Pressure: 20 bar minimum
Molybdenum addition increases chemical and high-temp shear toughness, requiring superior lubricity.
Chip Flow: High tendency for chips to weld to cutting edges if feed pauses.
Milling Direction: Mandatory climb milling.
- Reduce SFM by 10-15% compared to 304 stainless; keep chip load firm.
- Corner chamfer or radiused cutters prevent premature notch wear on the depth-of-cut line.
- Use high-feed milling or trochoidal toolpaths to spread wear along the full flute length.
Frequently Asked CNC Questions (316 Marine Grade Stainless Steel (with Molybdenum) / 3/4" (0.750 in))
What is the recommended RPM for milling 316 Marine Grade Stainless Steel (with Molybdenum) with a 3/4" (0.750 in) end mill?
What table feed rate and chip load should I program for 3/4" (0.750 in) in 316 Marine Grade Stainless Steel (with Molybdenum)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 316 Marine Grade Stainless Steel (with Molybdenum)?
Recent Calculations
No recent calculations saved yet.