7075-T6 Aerospace Aluminum — 1" (1.000 in) 4-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 7075-T6 Aerospace Aluminum with a 1" (1.000 in) 4-flute TiAlN carbide end mill, the recommended spindle speed is 7,268 RPM at 580 m/min (1902.9 SFM), with a profiling feed rate of 3,125 mm/min (123 IPM) and adjusted chip load of 0.1075 mm/tooth, achieving a material removal rate of 756.05 cm³/min (46.13 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math7075-T6 Aerospace Aluminum (1" (1.000 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 25.4 mm | 12.7 mm | 1× | 1,015 | 40 | 327.42 | 5.8 |
| Slotting (100% WOC) | 3F | 25.4 mm | 12.7 mm | 1× | 1,522 | 60 | 490.97 | 8.69 |
| Slotting (100% WOC) | 4F | 25.4 mm | 12.7 mm | 1× | 2,029 | 79.9 | 654.51 | 11.59 |
| Profiling / HEM (25% WOC) | 2F | 6.35 mm | 38.1 mm | 1.1547× | 1,563 | 61.5 | 378.14 | 6.7 |
| Profiling / HEM (25% WOC) | 3F | 6.35 mm | 38.1 mm | 1.1547× | 2,344 | 92.2 | 567.1 | 10.04 |
| Profiling / HEM (25% WOC) CURRENT | 4F | 6.35 mm | 38.1 mm | 1.1547× | 3,125 | 123 | 756.05 | 13.39 |
| Adaptive Clearing (10% WOC) | 2F | 2.54 mm | 50.8 mm | 1.6667× | 2,256 | 88.8 | 291.1 | 5.15 |
| Adaptive Clearing (10% WOC) | 3F | 2.54 mm | 50.8 mm | 1.6667× | 3,384 | 133.2 | 436.64 | 7.73 |
| Adaptive Clearing (10% WOC) | 4F | 2.54 mm | 50.8 mm | 1.6667× | 4,512 | 177.6 | 582.19 | 10.31 |
Shop-Floor Machining Strategy for 7075-T6 Aerospace Aluminum
Work Hardening: LowFlood Coolant with 8-10% Synthetic Soluble Oil Concentration
Pressure: Standard flood (5 bar minimum)
Zinc-alloyed aluminum chips break cleaner than 6061, with superior surface finish.
Chip Flow: Excellent short crisp chips compared to 6061. Can run 3-flute tools at aggressive feeds.
Milling Direction: Climb milling gives mirror surface finishes.
- High zinc content gives higher tensile strength; chips shear off crisply.
- Maintain tool rigidity; deflection causes dimensional drift on tight aerospace tolerances.
- Ideal candidate for High-Speed Machining (HSM) with high axial depth and light radial stepover.
Frequently Asked CNC Questions (7075-T6 Aerospace Aluminum / 1" (1.000 in))
What is the recommended RPM for milling 7075-T6 Aerospace Aluminum with a 1" (1.000 in) end mill?
What table feed rate and chip load should I program for 1" (1.000 in) in 7075-T6 Aerospace Aluminum?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 7075-T6 Aerospace Aluminum?
Recent Calculations
No recent calculations saved yet.