C36000 Free-Cutting Brass — 1" (1.000 in) 3-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling C36000 Free-Cutting Brass with a 1" (1.000 in) 3-flute TiAlN carbide end mill, the recommended spindle speed is 5,263 RPM at 420 m/min (1378 SFM), with a profiling feed rate of 1,577 mm/min (62.1 IPM) and adjusted chip load of 0.0999 mm/tooth, achieving a material removal rate of 381.53 cm³/min (23.29 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting MathC36000 Free-Cutting Brass (1" (1.000 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 25.4 mm | 12.7 mm | 1× | 682 | 26.8 | 220 | 3.44 |
| Slotting (100% WOC) | 3F | 25.4 mm | 12.7 mm | 1× | 1,023 | 40.3 | 330 | 5.16 |
| Slotting (100% WOC) | 4F | 25.4 mm | 12.7 mm | 1× | 1,364 | 53.7 | 440 | 6.88 |
| Profiling / HEM (25% WOC) | 2F | 6.35 mm | 38.1 mm | 1.1547× | 1,052 | 41.4 | 254.52 | 3.98 |
| Profiling / HEM (25% WOC) CURRENT | 3F | 6.35 mm | 38.1 mm | 1.1547× | 1,577 | 62.1 | 381.53 | 5.96 |
| Profiling / HEM (25% WOC) | 4F | 6.35 mm | 38.1 mm | 1.1547× | 2,103 | 82.7 | 508.79 | 7.95 |
| Adaptive Clearing (10% WOC) | 2F | 2.54 mm | 50.8 mm | 1.6667× | 1,518 | 59.8 | 195.87 | 3.06 |
| Adaptive Clearing (10% WOC) | 3F | 2.54 mm | 50.8 mm | 1.6667× | 2,277 | 89.7 | 293.81 | 4.59 |
| Adaptive Clearing (10% WOC) | 4F | 2.54 mm | 50.8 mm | 1.6667× | 3,036 | 119.6 | 391.74 | 6.12 |
Shop-Floor Machining Strategy for C36000 Free-Cutting Brass
Work Hardening: Very LowDry with Air Blast or Light Soluble Flood Coolant
Pressure: Air blast at 4-6 bar
Machines exceptionally well dry; lead micro-particles act as internal solid lubricant.
Chip Flow: Produces broken powdery needle chips. Air blast keeps work area clear.
Milling Direction: Both climb and conventional work, but climb produces superior Ra finish.
- Zero rake angle or slightly positive rake tooling prevents cutter self-feeding/grabbing into the material.
- Spindle speeds can be maxed out on modern CNC centers.
- Clean chip trays frequently as needle brass chips can clog sump pumps.
Frequently Asked CNC Questions (C36000 Free-Cutting Brass / 1" (1.000 in))
What is the recommended RPM for milling C36000 Free-Cutting Brass with a 1" (1.000 in) end mill?
What table feed rate and chip load should I program for 1" (1.000 in) in C36000 Free-Cutting Brass?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining C36000 Free-Cutting Brass?
Recent Calculations
No recent calculations saved yet.