1018 Mild Carbon Steel (Cold Rolled) — 10 mm 2-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 1018 Mild Carbon Steel (Cold Rolled) with a 10 mm 2-flute TiAlN carbide end mill, the recommended spindle speed is 7,639 RPM at 240 m/min (787.4 SFM), with a profiling feed rate of 613 mm/min (24.1 IPM) and adjusted chip load of 0.0401 mm/tooth, achieving a material removal rate of 22.99 cm³/min (1.4 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math1018 Mild Carbon Steel (Cold Rolled) (10 mm) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 10 mm | 5 mm | 1× | 397 | 15.6 | 19.85 | 0.62 |
| Slotting (100% WOC) | 3F | 10 mm | 5 mm | 1× | 596 | 23.4 | 29.8 | 0.93 |
| Slotting (100% WOC) | 4F | 10 mm | 5 mm | 1× | 794 | 31.2 | 39.7 | 1.24 |
| Profiling / HEM (25% WOC) CURRENT | 2F | 2.5 mm | 15 mm | 1.1547× | 613 | 24.1 | 22.99 | 0.72 |
| Profiling / HEM (25% WOC) | 3F | 2.5 mm | 15 mm | 1.1547× | 919 | 36.2 | 34.46 | 1.08 |
| Profiling / HEM (25% WOC) | 4F | 2.5 mm | 15 mm | 1.1547× | 1,225 | 48.3 | 45.94 | 1.44 |
| Adaptive Clearing (10% WOC) | 2F | 1 mm | 20 mm | 1.6667× | 883 | 34.8 | 17.66 | 0.55 |
| Adaptive Clearing (10% WOC) | 3F | 1 mm | 20 mm | 1.6667× | 1,325 | 52.3 | 26.5 | 0.83 |
| Adaptive Clearing (10% WOC) | 4F | 1 mm | 20 mm | 1.6667× | 1,766 | 69.7 | 35.32 | 1.1 |
Shop-Floor Machining Strategy for 1018 Mild Carbon Steel (Cold Rolled)
Work Hardening: ModerateFlood Coolant with 7-9% Soluble Oil or Dry with Air Blast for TiAlN Carbide
Pressure: 5 to 10 bar
With TiAlN coated carbide, dry cutting with air blast prevents thermal shock cycling on cutting edges.
Chip Flow: Low carbon steel can produce continuous gummy stringers if feed rate is too low. Keep chip load elevated.
Milling Direction: Always climb mill to manage tool heat dissipation into chips.
- Avoid rubbing at low feed rates. Feed fast enough to produce C-shaped curled blue/straw chips.
- TiAlN coating thrives on heat; avoid intermittent wet cooling that causes micro-cracking.
- 4-flute end mills deliver the best surface finish and wall straightness.
Frequently Asked CNC Questions (1018 Mild Carbon Steel (Cold Rolled) / 10 mm)
What is the recommended RPM for milling 1018 Mild Carbon Steel (Cold Rolled) with a 10 mm end mill?
What table feed rate and chip load should I program for 10 mm in 1018 Mild Carbon Steel (Cold Rolled)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 1018 Mild Carbon Steel (Cold Rolled)?
Recent Calculations
No recent calculations saved yet.