1018 Mild Carbon Steel (Cold Rolled) — 12 mm 2-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 1018 Mild Carbon Steel (Cold Rolled) with a 12 mm 2-flute TiAlN carbide end mill, the recommended spindle speed is 6,366 RPM at 240 m/min (787.4 SFM), with a profiling feed rate of 591 mm/min (23.3 IPM) and adjusted chip load of 0.0464 mm/tooth, achieving a material removal rate of 31.91 cm³/min (1.95 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math1018 Mild Carbon Steel (Cold Rolled) (12 mm) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 12 mm | 6 mm | 1× | 383 | 15.2 | 27.58 | 0.86 |
| Slotting (100% WOC) | 3F | 12 mm | 6 mm | 1× | 575 | 22.7 | 41.4 | 1.29 |
| Slotting (100% WOC) | 4F | 12 mm | 6 mm | 1× | 766 | 30.3 | 55.15 | 1.72 |
| Profiling / HEM (25% WOC) CURRENT | 2F | 3 mm | 18 mm | 1.1547× | 591 | 23.3 | 31.91 | 1 |
| Profiling / HEM (25% WOC) | 3F | 3 mm | 18 mm | 1.1547× | 886 | 34.9 | 47.84 | 1.49 |
| Profiling / HEM (25% WOC) | 4F | 3 mm | 18 mm | 1.1547× | 1,182 | 46.6 | 63.83 | 1.99 |
| Adaptive Clearing (10% WOC) | 2F | 1.2 mm | 24 mm | 1.6667× | 853 | 33.6 | 24.57 | 0.77 |
| Adaptive Clearing (10% WOC) | 3F | 1.2 mm | 24 mm | 1.6667× | 1,280 | 50.4 | 36.86 | 1.15 |
| Adaptive Clearing (10% WOC) | 4F | 1.2 mm | 24 mm | 1.6667× | 1,706 | 67.2 | 49.13 | 1.54 |
Shop-Floor Machining Strategy for 1018 Mild Carbon Steel (Cold Rolled)
Work Hardening: ModerateFlood Coolant with 7-9% Soluble Oil or Dry with Air Blast for TiAlN Carbide
Pressure: 5 to 10 bar
With TiAlN coated carbide, dry cutting with air blast prevents thermal shock cycling on cutting edges.
Chip Flow: Low carbon steel can produce continuous gummy stringers if feed rate is too low. Keep chip load elevated.
Milling Direction: Always climb mill to manage tool heat dissipation into chips.
- Avoid rubbing at low feed rates. Feed fast enough to produce C-shaped curled blue/straw chips.
- TiAlN coating thrives on heat; avoid intermittent wet cooling that causes micro-cracking.
- 4-flute end mills deliver the best surface finish and wall straightness.
Frequently Asked CNC Questions (1018 Mild Carbon Steel (Cold Rolled) / 12 mm)
What is the recommended RPM for milling 1018 Mild Carbon Steel (Cold Rolled) with a 12 mm end mill?
What table feed rate and chip load should I program for 12 mm in 1018 Mild Carbon Steel (Cold Rolled)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 1018 Mild Carbon Steel (Cold Rolled)?
Recent Calculations
No recent calculations saved yet.