1018 Mild Carbon Steel (Cold Rolled) — 16 mm 2-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 1018 Mild Carbon Steel (Cold Rolled) with a 16 mm 2-flute TiAlN carbide end mill, the recommended spindle speed is 4,775 RPM at 240 m/min (787.4 SFM), with a profiling feed rate of 557 mm/min (22 IPM) and adjusted chip load of 0.0583 mm/tooth, achieving a material removal rate of 53.47 cm³/min (3.27 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math1018 Mild Carbon Steel (Cold Rolled) (16 mm) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 16 mm | 8 mm | 1× | 362 | 14.2 | 46.34 | 1.45 |
| Slotting (100% WOC) | 3F | 16 mm | 8 mm | 1× | 543 | 21.3 | 69.5 | 2.17 |
| Slotting (100% WOC) | 4F | 16 mm | 8 mm | 1× | 724 | 28.5 | 92.67 | 2.9 |
| Profiling / HEM (25% WOC) CURRENT | 2F | 4 mm | 24 mm | 1.1547× | 557 | 22 | 53.47 | 1.67 |
| Profiling / HEM (25% WOC) | 3F | 4 mm | 24 mm | 1.1547× | 835 | 32.9 | 80.16 | 2.5 |
| Profiling / HEM (25% WOC) | 4F | 4 mm | 24 mm | 1.1547× | 1,114 | 43.9 | 106.94 | 3.34 |
| Adaptive Clearing (10% WOC) | 2F | 1.6 mm | 32 mm | 1.6667× | 804 | 31.6 | 41.16 | 1.29 |
| Adaptive Clearing (10% WOC) | 3F | 1.6 mm | 32 mm | 1.6667× | 1,206 | 47.4 | 61.75 | 1.93 |
| Adaptive Clearing (10% WOC) | 4F | 1.6 mm | 32 mm | 1.6667× | 1,608 | 63.2 | 82.33 | 2.57 |
Shop-Floor Machining Strategy for 1018 Mild Carbon Steel (Cold Rolled)
Work Hardening: ModerateFlood Coolant with 7-9% Soluble Oil or Dry with Air Blast for TiAlN Carbide
Pressure: 5 to 10 bar
With TiAlN coated carbide, dry cutting with air blast prevents thermal shock cycling on cutting edges.
Chip Flow: Low carbon steel can produce continuous gummy stringers if feed rate is too low. Keep chip load elevated.
Milling Direction: Always climb mill to manage tool heat dissipation into chips.
- Avoid rubbing at low feed rates. Feed fast enough to produce C-shaped curled blue/straw chips.
- TiAlN coating thrives on heat; avoid intermittent wet cooling that causes micro-cracking.
- 4-flute end mills deliver the best surface finish and wall straightness.
Frequently Asked CNC Questions (1018 Mild Carbon Steel (Cold Rolled) / 16 mm)
What is the recommended RPM for milling 1018 Mild Carbon Steel (Cold Rolled) with a 16 mm end mill?
What table feed rate and chip load should I program for 16 mm in 1018 Mild Carbon Steel (Cold Rolled)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 1018 Mild Carbon Steel (Cold Rolled)?
Recent Calculations
No recent calculations saved yet.