1018 Mild Carbon Steel (Cold Rolled) — 20 mm 4-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 1018 Mild Carbon Steel (Cold Rolled) with a 20 mm 4-flute TiAlN carbide end mill, the recommended spindle speed is 3,820 RPM at 240 m/min (787.4 SFM), with a profiling feed rate of 1,065 mm/min (41.9 IPM) and adjusted chip load of 0.0697 mm/tooth, achieving a material removal rate of 159.75 cm³/min (9.74 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math1018 Mild Carbon Steel (Cold Rolled) (20 mm) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 20 mm | 10 mm | 1× | 346 | 13.6 | 69.2 | 2.16 |
| Slotting (100% WOC) | 3F | 20 mm | 10 mm | 1× | 519 | 20.4 | 103.8 | 3.24 |
| Slotting (100% WOC) | 4F | 20 mm | 10 mm | 1× | 692 | 27.2 | 138.4 | 4.32 |
| Profiling / HEM (25% WOC) | 2F | 5 mm | 30 mm | 1.1547× | 533 | 20.9 | 79.95 | 2.5 |
| Profiling / HEM (25% WOC) | 3F | 5 mm | 30 mm | 1.1547× | 799 | 31.4 | 119.85 | 3.75 |
| Profiling / HEM (25% WOC) CURRENT | 4F | 5 mm | 30 mm | 1.1547× | 1,065 | 41.9 | 159.75 | 4.99 |
| Adaptive Clearing (10% WOC) | 2F | 2 mm | 40 mm | 1.6667× | 769 | 30.3 | 61.52 | 1.92 |
| Adaptive Clearing (10% WOC) | 3F | 2 mm | 40 mm | 1.6667× | 1,154 | 45.4 | 92.32 | 2.88 |
| Adaptive Clearing (10% WOC) | 4F | 2 mm | 40 mm | 1.6667× | 1,539 | 60.5 | 123.12 | 3.85 |
Shop-Floor Machining Strategy for 1018 Mild Carbon Steel (Cold Rolled)
Work Hardening: ModerateFlood Coolant with 7-9% Soluble Oil or Dry with Air Blast for TiAlN Carbide
Pressure: 5 to 10 bar
With TiAlN coated carbide, dry cutting with air blast prevents thermal shock cycling on cutting edges.
Chip Flow: Low carbon steel can produce continuous gummy stringers if feed rate is too low. Keep chip load elevated.
Milling Direction: Always climb mill to manage tool heat dissipation into chips.
- Avoid rubbing at low feed rates. Feed fast enough to produce C-shaped curled blue/straw chips.
- TiAlN coating thrives on heat; avoid intermittent wet cooling that causes micro-cracking.
- 4-flute end mills deliver the best surface finish and wall straightness.
Frequently Asked CNC Questions (1018 Mild Carbon Steel (Cold Rolled) / 20 mm)
What is the recommended RPM for milling 1018 Mild Carbon Steel (Cold Rolled) with a 20 mm end mill?
What table feed rate and chip load should I program for 20 mm in 1018 Mild Carbon Steel (Cold Rolled)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 1018 Mild Carbon Steel (Cold Rolled)?
Recent Calculations
No recent calculations saved yet.