1018 Mild Carbon Steel (Cold Rolled) — 2 mm 4-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 1018 Mild Carbon Steel (Cold Rolled) with a 2 mm 4-flute TiAlN carbide end mill, the recommended spindle speed is 38,197 RPM at 240 m/min (787.4 SFM), with a profiling feed rate of 1,696 mm/min (67.2 IPM) and adjusted chip load of 0.0111 mm/tooth, achieving a material removal rate of 2.54 cm³/min (0.16 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math1018 Mild Carbon Steel (Cold Rolled) (2 mm) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 2 mm | 1 mm | 1× | 550 | 21.4 | 1.1 | 0.03 |
| Slotting (100% WOC) | 3F | 2 mm | 1 mm | 1× | 825 | 32.1 | 1.65 | 0.05 |
| Slotting (100% WOC) | 4F | 2 mm | 1 mm | 1× | 1,100 | 42.8 | 2.2 | 0.07 |
| Profiling / HEM (25% WOC) | 2F | 0.5 mm | 3 mm | 1.1547× | 848 | 33.6 | 1.27 | 0.04 |
| Profiling / HEM (25% WOC) | 3F | 0.5 mm | 3 mm | 1.1547× | 1,272 | 50.4 | 1.91 | 0.06 |
| Profiling / HEM (25% WOC) CURRENT | 4F | 0.5 mm | 3 mm | 1.1547× | 1,696 | 67.2 | 2.54 | 0.08 |
| Adaptive Clearing (10% WOC) | 2F | 0.2 mm | 4 mm | 1.6667× | 1,222 | 48.1 | 0.98 | 0.03 |
| Adaptive Clearing (10% WOC) | 3F | 0.2 mm | 4 mm | 1.6667× | 1,833 | 72.2 | 1.47 | 0.05 |
| Adaptive Clearing (10% WOC) | 4F | 0.2 mm | 4 mm | 1.6667× | 2,445 | 96.3 | 1.96 | 0.06 |
Shop-Floor Machining Strategy for 1018 Mild Carbon Steel (Cold Rolled)
Work Hardening: ModerateFlood Coolant with 7-9% Soluble Oil or Dry with Air Blast for TiAlN Carbide
Pressure: 5 to 10 bar
With TiAlN coated carbide, dry cutting with air blast prevents thermal shock cycling on cutting edges.
Chip Flow: Low carbon steel can produce continuous gummy stringers if feed rate is too low. Keep chip load elevated.
Milling Direction: Always climb mill to manage tool heat dissipation into chips.
- Avoid rubbing at low feed rates. Feed fast enough to produce C-shaped curled blue/straw chips.
- TiAlN coating thrives on heat; avoid intermittent wet cooling that causes micro-cracking.
- 4-flute end mills deliver the best surface finish and wall straightness.
Frequently Asked CNC Questions (1018 Mild Carbon Steel (Cold Rolled) / 2 mm)
What is the recommended RPM for milling 1018 Mild Carbon Steel (Cold Rolled) with a 2 mm end mill?
What table feed rate and chip load should I program for 2 mm in 1018 Mild Carbon Steel (Cold Rolled)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 1018 Mild Carbon Steel (Cold Rolled)?
Recent Calculations
No recent calculations saved yet.