1018 Mild Carbon Steel (Cold Rolled) — 4 mm 4-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 1018 Mild Carbon Steel (Cold Rolled) with a 4 mm 4-flute TiAlN carbide end mill, the recommended spindle speed is 19,099 RPM at 240 m/min (787.4 SFM), with a profiling feed rate of 1,474 mm/min (58.1 IPM) and adjusted chip load of 0.0193 mm/tooth, achieving a material removal rate of 8.84 cm³/min (0.54 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math1018 Mild Carbon Steel (Cold Rolled) (4 mm) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 4 mm | 2 mm | 1× | 477 | 18.7 | 3.82 | 0.12 |
| Slotting (100% WOC) | 3F | 4 mm | 2 mm | 1× | 716 | 28.1 | 5.73 | 0.18 |
| Slotting (100% WOC) | 4F | 4 mm | 2 mm | 1× | 955 | 37.4 | 7.64 | 0.24 |
| Profiling / HEM (25% WOC) | 2F | 1 mm | 6 mm | 1.1547× | 737 | 29 | 4.42 | 0.14 |
| Profiling / HEM (25% WOC) | 3F | 1 mm | 6 mm | 1.1547× | 1,106 | 43.5 | 6.64 | 0.21 |
| Profiling / HEM (25% WOC) CURRENT | 4F | 1 mm | 6 mm | 1.1547× | 1,474 | 58.1 | 8.84 | 0.28 |
| Adaptive Clearing (10% WOC) | 2F | 0.4 mm | 8 mm | 1.6667× | 1,062 | 41.6 | 3.4 | 0.11 |
| Adaptive Clearing (10% WOC) | 3F | 0.4 mm | 8 mm | 1.6667× | 1,593 | 62.5 | 5.1 | 0.16 |
| Adaptive Clearing (10% WOC) | 4F | 0.4 mm | 8 mm | 1.6667× | 2,124 | 83.3 | 6.8 | 0.21 |
Shop-Floor Machining Strategy for 1018 Mild Carbon Steel (Cold Rolled)
Work Hardening: ModerateFlood Coolant with 7-9% Soluble Oil or Dry with Air Blast for TiAlN Carbide
Pressure: 5 to 10 bar
With TiAlN coated carbide, dry cutting with air blast prevents thermal shock cycling on cutting edges.
Chip Flow: Low carbon steel can produce continuous gummy stringers if feed rate is too low. Keep chip load elevated.
Milling Direction: Always climb mill to manage tool heat dissipation into chips.
- Avoid rubbing at low feed rates. Feed fast enough to produce C-shaped curled blue/straw chips.
- TiAlN coating thrives on heat; avoid intermittent wet cooling that causes micro-cracking.
- 4-flute end mills deliver the best surface finish and wall straightness.
Frequently Asked CNC Questions (1018 Mild Carbon Steel (Cold Rolled) / 4 mm)
What is the recommended RPM for milling 1018 Mild Carbon Steel (Cold Rolled) with a 4 mm end mill?
What table feed rate and chip load should I program for 4 mm in 1018 Mild Carbon Steel (Cold Rolled)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 1018 Mild Carbon Steel (Cold Rolled)?
Recent Calculations
No recent calculations saved yet.