17-4 PH Precipitation Hardening Stainless (Condition H900 / 40 HRC) — 3 mm 3-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 17-4 PH Precipitation Hardening Stainless (Condition H900 / 40 HRC) with a 3 mm 3-flute TiAlN carbide end mill, the recommended spindle speed is 11,671 RPM at 110 m/min (360.9 SFM), with a profiling feed rate of 340 mm/min (13.3 IPM) and adjusted chip load of 0.0097 mm/tooth, achieving a material removal rate of 1.15 cm³/min (0.07 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math17-4 PH Precipitation Hardening Stainless (Condition H900 / 40 HRC) (3 mm) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 3 mm | 1.5 mm | 1× | 147 | 5.8 | 0.66 | 0.04 |
| Slotting (100% WOC) | 3F | 3 mm | 1.5 mm | 1× | 221 | 8.8 | 0.99 | 0.05 |
| Slotting (100% WOC) | 4F | 3 mm | 1.5 mm | 1× | 294 | 11.7 | 1.32 | 0.07 |
| Profiling / HEM (25% WOC) | 2F | 0.75 mm | 4.5 mm | 1.1547× | 226 | 8.9 | 0.76 | 0.04 |
| Profiling / HEM (25% WOC) CURRENT | 3F | 0.75 mm | 4.5 mm | 1.1547× | 340 | 13.3 | 1.15 | 0.06 |
| Profiling / HEM (25% WOC) | 4F | 0.75 mm | 4.5 mm | 1.1547× | 453 | 17.7 | 1.53 | 0.08 |
| Adaptive Clearing (10% WOC) | 2F | 0.3 mm | 6 mm | 1.6667× | 327 | 12.8 | 0.59 | 0.03 |
| Adaptive Clearing (10% WOC) | 3F | 0.3 mm | 6 mm | 1.6667× | 490 | 19.3 | 0.88 | 0.05 |
| Adaptive Clearing (10% WOC) | 4F | 0.3 mm | 6 mm | 1.6667× | 654 | 25.7 | 1.18 | 0.06 |
Shop-Floor Machining Strategy for 17-4 PH Precipitation Hardening Stainless (Condition H900 / 40 HRC)
Work Hardening: HighHigh-Pressure Flood Coolant with Synthetic Water-Soluble Fluid
Pressure: 30 to 70 bar
Heat dissipation from the shear zone prevents thermal tempering and edge fatigue.
Chip Flow: Crisp, tight curled chips; high cutting forces generated.
Milling Direction: Always climb mill.
- In H900 condition, tool rigidity and low runout (<0.005 mm) are required to avoid chipped flutes.
- Use thick-core end mills designed for hardened steels (4-5 flutes).
- Trochoidal / dynamic milling with light radial engagement (6-10%) increases tool life by 300%.
Frequently Asked CNC Questions (17-4 PH Precipitation Hardening Stainless (Condition H900 / 40 HRC) / 3 mm)
What is the recommended RPM for milling 17-4 PH Precipitation Hardening Stainless (Condition H900 / 40 HRC) with a 3 mm end mill?
What table feed rate and chip load should I program for 3 mm in 17-4 PH Precipitation Hardening Stainless (Condition H900 / 40 HRC)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 17-4 PH Precipitation Hardening Stainless (Condition H900 / 40 HRC)?
Recent Calculations
No recent calculations saved yet.