316 Marine Grade Stainless Steel (with Molybdenum) — 1" (1.000 in) 3-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 316 Marine Grade Stainless Steel (with Molybdenum) with a 1" (1.000 in) 3-flute TiAlN carbide end mill, the recommended spindle speed is 1,566 RPM at 125 m/min (410.1 SFM), with a profiling feed rate of 274 mm/min (10.8 IPM) and adjusted chip load of 0.0583 mm/tooth, achieving a material removal rate of 66.29 cm³/min (4.05 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math316 Marine Grade Stainless Steel (with Molybdenum) (1" (1.000 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 25.4 mm | 12.7 mm | 1× | 119 | 4.7 | 38.39 | 1.84 |
| Slotting (100% WOC) | 3F | 25.4 mm | 12.7 mm | 1× | 178 | 7 | 57.42 | 2.75 |
| Slotting (100% WOC) | 4F | 25.4 mm | 12.7 mm | 1× | 237 | 9.3 | 76.45 | 3.66 |
| Profiling / HEM (25% WOC) | 2F | 6.35 mm | 38.1 mm | 1.1547× | 183 | 7.2 | 44.27 | 2.12 |
| Profiling / HEM (25% WOC) CURRENT | 3F | 6.35 mm | 38.1 mm | 1.1547× | 274 | 10.8 | 66.29 | 3.18 |
| Profiling / HEM (25% WOC) | 4F | 6.35 mm | 38.1 mm | 1.1547× | 365 | 14.4 | 88.31 | 4.23 |
| Adaptive Clearing (10% WOC) | 2F | 2.54 mm | 50.8 mm | 1.6667× | 264 | 10.4 | 34.06 | 1.63 |
| Adaptive Clearing (10% WOC) | 3F | 2.54 mm | 50.8 mm | 1.6667× | 396 | 15.6 | 51.1 | 2.45 |
| Adaptive Clearing (10% WOC) | 4F | 2.54 mm | 50.8 mm | 1.6667× | 527 | 20.7 | 68 | 3.26 |
Shop-Floor Machining Strategy for 316 Marine Grade Stainless Steel (with Molybdenum)
Work Hardening: EXTREMEHeavy Flood Coolant with Extreme Pressure (EP) Additives
Pressure: 20 bar minimum
Molybdenum addition increases chemical and high-temp shear toughness, requiring superior lubricity.
Chip Flow: High tendency for chips to weld to cutting edges if feed pauses.
Milling Direction: Mandatory climb milling.
- Reduce SFM by 10-15% compared to 304 stainless; keep chip load firm.
- Corner chamfer or radiused cutters prevent premature notch wear on the depth-of-cut line.
- Use high-feed milling or trochoidal toolpaths to spread wear along the full flute length.
Frequently Asked CNC Questions (316 Marine Grade Stainless Steel (with Molybdenum) / 1" (1.000 in))
What is the recommended RPM for milling 316 Marine Grade Stainless Steel (with Molybdenum) with a 1" (1.000 in) end mill?
What table feed rate and chip load should I program for 1" (1.000 in) in 316 Marine Grade Stainless Steel (with Molybdenum)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 316 Marine Grade Stainless Steel (with Molybdenum)?
Recent Calculations
No recent calculations saved yet.