316 Marine Grade Stainless Steel (with Molybdenum) — 16 mm 3-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 316 Marine Grade Stainless Steel (with Molybdenum) with a 16 mm 3-flute TiAlN carbide end mill, the recommended spindle speed is 2,487 RPM at 125 m/min (410.1 SFM), with a profiling feed rate of 301 mm/min (11.9 IPM) and adjusted chip load of 0.0403 mm/tooth, achieving a material removal rate of 28.9 cm³/min (1.77 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math316 Marine Grade Stainless Steel (with Molybdenum) (16 mm) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 16 mm | 8 mm | 1× | 130 | 5.1 | 16.64 | 0.8 |
| Slotting (100% WOC) | 3F | 16 mm | 8 mm | 1× | 195 | 7.7 | 24.96 | 1.2 |
| Slotting (100% WOC) | 4F | 16 mm | 8 mm | 1× | 261 | 10.2 | 33.41 | 1.6 |
| Profiling / HEM (25% WOC) | 2F | 4 mm | 24 mm | 1.1547× | 200 | 7.9 | 19.2 | 0.92 |
| Profiling / HEM (25% WOC) CURRENT | 3F | 4 mm | 24 mm | 1.1547× | 301 | 11.9 | 28.9 | 1.38 |
| Profiling / HEM (25% WOC) | 4F | 4 mm | 24 mm | 1.1547× | 401 | 15.8 | 38.5 | 1.84 |
| Adaptive Clearing (10% WOC) | 2F | 1.6 mm | 32 mm | 1.6667× | 289 | 11.4 | 14.8 | 0.71 |
| Adaptive Clearing (10% WOC) | 3F | 1.6 mm | 32 mm | 1.6667× | 434 | 17.1 | 22.22 | 1.06 |
| Adaptive Clearing (10% WOC) | 4F | 1.6 mm | 32 mm | 1.6667× | 579 | 22.8 | 29.64 | 1.42 |
Shop-Floor Machining Strategy for 316 Marine Grade Stainless Steel (with Molybdenum)
Work Hardening: EXTREMEHeavy Flood Coolant with Extreme Pressure (EP) Additives
Pressure: 20 bar minimum
Molybdenum addition increases chemical and high-temp shear toughness, requiring superior lubricity.
Chip Flow: High tendency for chips to weld to cutting edges if feed pauses.
Milling Direction: Mandatory climb milling.
- Reduce SFM by 10-15% compared to 304 stainless; keep chip load firm.
- Corner chamfer or radiused cutters prevent premature notch wear on the depth-of-cut line.
- Use high-feed milling or trochoidal toolpaths to spread wear along the full flute length.
Frequently Asked CNC Questions (316 Marine Grade Stainless Steel (with Molybdenum) / 16 mm)
What is the recommended RPM for milling 316 Marine Grade Stainless Steel (with Molybdenum) with a 16 mm end mill?
What table feed rate and chip load should I program for 16 mm in 316 Marine Grade Stainless Steel (with Molybdenum)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 316 Marine Grade Stainless Steel (with Molybdenum)?
Recent Calculations
No recent calculations saved yet.