316 Marine Grade Stainless Steel (with Molybdenum) — 2 mm 4-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 316 Marine Grade Stainless Steel (with Molybdenum) with a 2 mm 4-flute TiAlN carbide end mill, the recommended spindle speed is 19,894 RPM at 125 m/min (410.1 SFM), with a profiling feed rate of 605 mm/min (23.9 IPM) and adjusted chip load of 0.0076 mm/tooth, achieving a material removal rate of 0.91 cm³/min (0.06 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math316 Marine Grade Stainless Steel (with Molybdenum) (2 mm) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 2 mm | 1 mm | 1× | 199 | 8 | 0.4 | 0.02 |
| Slotting (100% WOC) | 3F | 2 mm | 1 mm | 1× | 298 | 11.9 | 0.6 | 0.03 |
| Slotting (100% WOC) | 4F | 2 mm | 1 mm | 1× | 398 | 15.9 | 0.8 | 0.04 |
| Profiling / HEM (25% WOC) | 2F | 0.5 mm | 3 mm | 1.1547× | 302 | 11.9 | 0.45 | 0.02 |
| Profiling / HEM (25% WOC) | 3F | 0.5 mm | 3 mm | 1.1547× | 454 | 17.9 | 0.68 | 0.03 |
| Profiling / HEM (25% WOC) CURRENT | 4F | 0.5 mm | 3 mm | 1.1547× | 605 | 23.9 | 0.91 | 0.04 |
| Adaptive Clearing (10% WOC) | 2F | 0.2 mm | 4 mm | 1.6667× | 438 | 17.1 | 0.35 | 0.02 |
| Adaptive Clearing (10% WOC) | 3F | 0.2 mm | 4 mm | 1.6667× | 657 | 25.7 | 0.53 | 0.03 |
| Adaptive Clearing (10% WOC) | 4F | 0.2 mm | 4 mm | 1.6667× | 875 | 34.2 | 0.7 | 0.03 |
Shop-Floor Machining Strategy for 316 Marine Grade Stainless Steel (with Molybdenum)
Work Hardening: EXTREMEHeavy Flood Coolant with Extreme Pressure (EP) Additives
Pressure: 20 bar minimum
Molybdenum addition increases chemical and high-temp shear toughness, requiring superior lubricity.
Chip Flow: High tendency for chips to weld to cutting edges if feed pauses.
Milling Direction: Mandatory climb milling.
- Reduce SFM by 10-15% compared to 304 stainless; keep chip load firm.
- Corner chamfer or radiused cutters prevent premature notch wear on the depth-of-cut line.
- Use high-feed milling or trochoidal toolpaths to spread wear along the full flute length.
Frequently Asked CNC Questions (316 Marine Grade Stainless Steel (with Molybdenum) / 2 mm)
What is the recommended RPM for milling 316 Marine Grade Stainless Steel (with Molybdenum) with a 2 mm end mill?
What table feed rate and chip load should I program for 2 mm in 316 Marine Grade Stainless Steel (with Molybdenum)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 316 Marine Grade Stainless Steel (with Molybdenum)?
Recent Calculations
No recent calculations saved yet.