316 Marine Grade Stainless Steel (with Molybdenum) — 3/16" (0.1875 in) 4-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 316 Marine Grade Stainless Steel (with Molybdenum) with a 3/16" (0.1875 in) 4-flute TiAlN carbide end mill, the recommended spindle speed is 8,355 RPM at 125 m/min (410.1 SFM), with a profiling feed rate of 508 mm/min (20.1 IPM) and adjusted chip load of 0.0152 mm/tooth, achieving a material removal rate of 4.32 cm³/min (0.26 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math316 Marine Grade Stainless Steel (with Molybdenum) (3/16" (0.1875 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 4.76 mm | 2.38 mm | 1× | 165 | 6.5 | 1.87 | 0.09 |
| Slotting (100% WOC) | 3F | 4.76 mm | 2.38 mm | 1× | 248 | 9.8 | 2.81 | 0.13 |
| Slotting (100% WOC) | 4F | 4.76 mm | 2.38 mm | 1× | 331 | 13 | 3.75 | 0.18 |
| Profiling / HEM (25% WOC) | 2F | 1.19 mm | 7.14 mm | 1.1549× | 254 | 10 | 2.16 | 0.1 |
| Profiling / HEM (25% WOC) | 3F | 1.19 mm | 7.14 mm | 1.1549× | 381 | 15 | 3.24 | 0.16 |
| Profiling / HEM (25% WOC) CURRENT | 4F | 1.19 mm | 7.14 mm | 1.1549× | 508 | 20.1 | 4.32 | 0.21 |
| Adaptive Clearing (10% WOC) | 2F | 0.48 mm | 9.52 mm | 1.6608× | 366 | 14.4 | 1.67 | 0.08 |
| Adaptive Clearing (10% WOC) | 3F | 0.48 mm | 9.52 mm | 1.6608× | 549 | 21.6 | 2.51 | 0.12 |
| Adaptive Clearing (10% WOC) | 4F | 0.48 mm | 9.52 mm | 1.6608× | 732 | 28.7 | 3.34 | 0.16 |
Shop-Floor Machining Strategy for 316 Marine Grade Stainless Steel (with Molybdenum)
Work Hardening: EXTREMEHeavy Flood Coolant with Extreme Pressure (EP) Additives
Pressure: 20 bar minimum
Molybdenum addition increases chemical and high-temp shear toughness, requiring superior lubricity.
Chip Flow: High tendency for chips to weld to cutting edges if feed pauses.
Milling Direction: Mandatory climb milling.
- Reduce SFM by 10-15% compared to 304 stainless; keep chip load firm.
- Corner chamfer or radiused cutters prevent premature notch wear on the depth-of-cut line.
- Use high-feed milling or trochoidal toolpaths to spread wear along the full flute length.
Frequently Asked CNC Questions (316 Marine Grade Stainless Steel (with Molybdenum) / 3/16" (0.1875 in))
What is the recommended RPM for milling 316 Marine Grade Stainless Steel (with Molybdenum) with a 3/16" (0.1875 in) end mill?
What table feed rate and chip load should I program for 3/16" (0.1875 in) in 316 Marine Grade Stainless Steel (with Molybdenum)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 316 Marine Grade Stainless Steel (with Molybdenum)?
Recent Calculations
No recent calculations saved yet.