316 Marine Grade Stainless Steel (with Molybdenum) — 6 mm 4-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 316 Marine Grade Stainless Steel (with Molybdenum) with a 6 mm 4-flute TiAlN carbide end mill, the recommended spindle speed is 6,631 RPM at 125 m/min (410.1 SFM), with a profiling feed rate of 488 mm/min (19.1 IPM) and adjusted chip load of 0.0184 mm/tooth, achieving a material removal rate of 6.59 cm³/min (0.4 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math316 Marine Grade Stainless Steel (with Molybdenum) (6 mm) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 6 mm | 3 mm | 1× | 158 | 6.2 | 2.84 | 0.14 |
| Slotting (100% WOC) | 3F | 6 mm | 3 mm | 1× | 237 | 9.3 | 4.27 | 0.2 |
| Slotting (100% WOC) | 4F | 6 mm | 3 mm | 1× | 316 | 12.5 | 5.69 | 0.27 |
| Profiling / HEM (25% WOC) | 2F | 1.5 mm | 9 mm | 1.1547× | 244 | 9.5 | 3.29 | 0.16 |
| Profiling / HEM (25% WOC) | 3F | 1.5 mm | 9 mm | 1.1547× | 366 | 14.3 | 4.94 | 0.24 |
| Profiling / HEM (25% WOC) CURRENT | 4F | 1.5 mm | 9 mm | 1.1547× | 488 | 19.1 | 6.59 | 0.32 |
| Adaptive Clearing (10% WOC) | 2F | 0.6 mm | 12 mm | 1.6667× | 351 | 13.8 | 2.53 | 0.12 |
| Adaptive Clearing (10% WOC) | 3F | 0.6 mm | 12 mm | 1.6667× | 527 | 20.7 | 3.79 | 0.18 |
| Adaptive Clearing (10% WOC) | 4F | 0.6 mm | 12 mm | 1.6667× | 703 | 27.6 | 5.06 | 0.24 |
Shop-Floor Machining Strategy for 316 Marine Grade Stainless Steel (with Molybdenum)
Work Hardening: EXTREMEHeavy Flood Coolant with Extreme Pressure (EP) Additives
Pressure: 20 bar minimum
Molybdenum addition increases chemical and high-temp shear toughness, requiring superior lubricity.
Chip Flow: High tendency for chips to weld to cutting edges if feed pauses.
Milling Direction: Mandatory climb milling.
- Reduce SFM by 10-15% compared to 304 stainless; keep chip load firm.
- Corner chamfer or radiused cutters prevent premature notch wear on the depth-of-cut line.
- Use high-feed milling or trochoidal toolpaths to spread wear along the full flute length.
Frequently Asked CNC Questions (316 Marine Grade Stainless Steel (with Molybdenum) / 6 mm)
What is the recommended RPM for milling 316 Marine Grade Stainless Steel (with Molybdenum) with a 6 mm end mill?
What table feed rate and chip load should I program for 6 mm in 316 Marine Grade Stainless Steel (with Molybdenum)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 316 Marine Grade Stainless Steel (with Molybdenum)?
Recent Calculations
No recent calculations saved yet.