4140 Chromium-Molybdenum Alloy Steel (Pre-hardened 28-32 HRC) — 1" (1.000 in) 2-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 4140 Chromium-Molybdenum Alloy Steel (Pre-hardened 28-32 HRC) with a 1" (1.000 in) 2-flute TiAlN carbide end mill, the recommended spindle speed is 2,381 RPM at 190 m/min (623.4 SFM), with a profiling feed rate of 351 mm/min (13.8 IPM) and adjusted chip load of 0.0737 mm/tooth, achieving a material removal rate of 84.92 cm³/min (5.18 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math4140 Chromium-Molybdenum Alloy Steel (Pre-hardened 28-32 HRC) (1" (1.000 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 25.4 mm | 12.7 mm | 1× | 228 | 9 | 73.55 | 3.22 |
| Slotting (100% WOC) | 3F | 25.4 mm | 12.7 mm | 1× | 342 | 13.5 | 110.32 | 4.83 |
| Slotting (100% WOC) | 4F | 25.4 mm | 12.7 mm | 1× | 456 | 18 | 147.1 | 6.44 |
| Profiling / HEM (25% WOC) CURRENT | 2F | 6.35 mm | 38.1 mm | 1.1547× | 351 | 13.8 | 84.92 | 3.72 |
| Profiling / HEM (25% WOC) | 3F | 6.35 mm | 38.1 mm | 1.1547× | 526 | 20.7 | 127.26 | 5.57 |
| Profiling / HEM (25% WOC) | 4F | 6.35 mm | 38.1 mm | 1.1547× | 702 | 27.6 | 169.84 | 7.43 |
| Adaptive Clearing (10% WOC) | 2F | 2.54 mm | 50.8 mm | 1.6667× | 506 | 20 | 65.29 | 2.86 |
| Adaptive Clearing (10% WOC) | 3F | 2.54 mm | 50.8 mm | 1.6667× | 759 | 29.9 | 97.94 | 4.28 |
| Adaptive Clearing (10% WOC) | 4F | 2.54 mm | 50.8 mm | 1.6667× | 1,012 | 39.9 | 130.58 | 5.71 |
Shop-Floor Machining Strategy for 4140 Chromium-Molybdenum Alloy Steel (Pre-hardened 28-32 HRC)
Work Hardening: Moderate-HighAir Blast for TiAlN Coated Carbide; Flood Coolant for HSS
Pressure: 6 bar air blast or 20 bar high-pressure flood
Thermal shock from erratic coolant flow causes micro-chipping of carbide cutting edges.
Chip Flow: Short curled chips form with proper feed; excellent surface finish potential.
Milling Direction: Climb milling essential to enter at thickest chip portion.
- Pre-hardened 4140 (HT) machines cleanly with rigid setups and AlTiN or TiAlN coated tooling.
- Use high-efficiency milling (HEM): 8-12% ae radial engagement with 1.5x-2.0x ap depth of cut.
- Keep tool stickout as short as possible to eliminate chatter harmonics.
Frequently Asked CNC Questions (4140 Chromium-Molybdenum Alloy Steel (Pre-hardened 28-32 HRC) / 1" (1.000 in))
What is the recommended RPM for milling 4140 Chromium-Molybdenum Alloy Steel (Pre-hardened 28-32 HRC) with a 1" (1.000 in) end mill?
What table feed rate and chip load should I program for 1" (1.000 in) in 4140 Chromium-Molybdenum Alloy Steel (Pre-hardened 28-32 HRC)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 4140 Chromium-Molybdenum Alloy Steel (Pre-hardened 28-32 HRC)?
Recent Calculations
No recent calculations saved yet.