4140 Chromium-Molybdenum Alloy Steel (Pre-hardened 28-32 HRC) — 3/4" (0.750 in) 2-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 4140 Chromium-Molybdenum Alloy Steel (Pre-hardened 28-32 HRC) with a 3/4" (0.750 in) 2-flute TiAlN carbide end mill, the recommended spindle speed is 3,175 RPM at 190 m/min (623.4 SFM), with a profiling feed rate of 372 mm/min (14.7 IPM) and adjusted chip load of 0.0586 mm/tooth, achieving a material removal rate of 50.61 cm³/min (3.1 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math4140 Chromium-Molybdenum Alloy Steel (Pre-hardened 28-32 HRC) (3/4" (0.750 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 19.05 mm | 9.53 mm | 1× | 241 | 9.5 | 43.75 | 1.91 |
| Slotting (100% WOC) | 3F | 19.05 mm | 9.53 mm | 1× | 362 | 14.3 | 65.72 | 2.88 |
| Slotting (100% WOC) | 4F | 19.05 mm | 9.53 mm | 1× | 483 | 19.1 | 87.69 | 3.84 |
| Profiling / HEM (25% WOC) CURRENT | 2F | 4.76 mm | 28.58 mm | 1.1549× | 372 | 14.7 | 50.61 | 2.21 |
| Profiling / HEM (25% WOC) | 3F | 4.76 mm | 28.58 mm | 1.1549× | 558 | 22 | 75.91 | 3.32 |
| Profiling / HEM (25% WOC) | 4F | 4.76 mm | 28.58 mm | 1.1549× | 744 | 29.3 | 101.21 | 4.43 |
| Adaptive Clearing (10% WOC) | 2F | 1.91 mm | 38.1 mm | 1.6647× | 536 | 21.1 | 39.01 | 1.71 |
| Adaptive Clearing (10% WOC) | 3F | 1.91 mm | 38.1 mm | 1.6647× | 804 | 31.6 | 58.51 | 2.56 |
| Adaptive Clearing (10% WOC) | 4F | 1.91 mm | 38.1 mm | 1.6647× | 1,072 | 42.2 | 78.01 | 3.41 |
Shop-Floor Machining Strategy for 4140 Chromium-Molybdenum Alloy Steel (Pre-hardened 28-32 HRC)
Work Hardening: Moderate-HighAir Blast for TiAlN Coated Carbide; Flood Coolant for HSS
Pressure: 6 bar air blast or 20 bar high-pressure flood
Thermal shock from erratic coolant flow causes micro-chipping of carbide cutting edges.
Chip Flow: Short curled chips form with proper feed; excellent surface finish potential.
Milling Direction: Climb milling essential to enter at thickest chip portion.
- Pre-hardened 4140 (HT) machines cleanly with rigid setups and AlTiN or TiAlN coated tooling.
- Use high-efficiency milling (HEM): 8-12% ae radial engagement with 1.5x-2.0x ap depth of cut.
- Keep tool stickout as short as possible to eliminate chatter harmonics.
Frequently Asked CNC Questions (4140 Chromium-Molybdenum Alloy Steel (Pre-hardened 28-32 HRC) / 3/4" (0.750 in))
What is the recommended RPM for milling 4140 Chromium-Molybdenum Alloy Steel (Pre-hardened 28-32 HRC) with a 3/4" (0.750 in) end mill?
What table feed rate and chip load should I program for 3/4" (0.750 in) in 4140 Chromium-Molybdenum Alloy Steel (Pre-hardened 28-32 HRC)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 4140 Chromium-Molybdenum Alloy Steel (Pre-hardened 28-32 HRC)?
Recent Calculations
No recent calculations saved yet.