4140 Chromium-Molybdenum Alloy Steel (Pre-hardened 28-32 HRC) — 3/8" (0.375 in) 3-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 4140 Chromium-Molybdenum Alloy Steel (Pre-hardened 28-32 HRC) with a 3/8" (0.375 in) 3-flute TiAlN carbide end mill, the recommended spindle speed is 6,349 RPM at 190 m/min (623.4 SFM), with a profiling feed rate of 640 mm/min (25.1 IPM) and adjusted chip load of 0.0336 mm/tooth, achieving a material removal rate of 21.77 cm³/min (1.32 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math4140 Chromium-Molybdenum Alloy Steel (Pre-hardened 28-32 HRC) (3/8" (0.375 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 9.53 mm | 4.76 mm | 1× | 277 | 10.9 | 12.57 | 0.55 |
| Slotting (100% WOC) | 3F | 9.53 mm | 4.76 mm | 1× | 415 | 16.4 | 18.83 | 0.82 |
| Slotting (100% WOC) | 4F | 9.53 mm | 4.76 mm | 1× | 554 | 21.8 | 25.13 | 1.1 |
| Profiling / HEM (25% WOC) | 2F | 2.38 mm | 14.29 mm | 1.1549× | 427 | 16.8 | 14.52 | 0.64 |
| Profiling / HEM (25% WOC) CURRENT | 3F | 2.38 mm | 14.29 mm | 1.1549× | 640 | 25.1 | 21.77 | 0.95 |
| Profiling / HEM (25% WOC) | 4F | 2.38 mm | 14.29 mm | 1.1549× | 853 | 33.5 | 29.01 | 1.27 |
| Adaptive Clearing (10% WOC) | 2F | 0.95 mm | 19.05 mm | 1.6686× | 617 | 24.3 | 11.17 | 0.49 |
| Adaptive Clearing (10% WOC) | 3F | 0.95 mm | 19.05 mm | 1.6686× | 926 | 36.4 | 16.76 | 0.73 |
| Adaptive Clearing (10% WOC) | 4F | 0.95 mm | 19.05 mm | 1.6686× | 1,234 | 48.5 | 22.33 | 0.98 |
Shop-Floor Machining Strategy for 4140 Chromium-Molybdenum Alloy Steel (Pre-hardened 28-32 HRC)
Work Hardening: Moderate-HighAir Blast for TiAlN Coated Carbide; Flood Coolant for HSS
Pressure: 6 bar air blast or 20 bar high-pressure flood
Thermal shock from erratic coolant flow causes micro-chipping of carbide cutting edges.
Chip Flow: Short curled chips form with proper feed; excellent surface finish potential.
Milling Direction: Climb milling essential to enter at thickest chip portion.
- Pre-hardened 4140 (HT) machines cleanly with rigid setups and AlTiN or TiAlN coated tooling.
- Use high-efficiency milling (HEM): 8-12% ae radial engagement with 1.5x-2.0x ap depth of cut.
- Keep tool stickout as short as possible to eliminate chatter harmonics.
Frequently Asked CNC Questions (4140 Chromium-Molybdenum Alloy Steel (Pre-hardened 28-32 HRC) / 3/8" (0.375 in))
What is the recommended RPM for milling 4140 Chromium-Molybdenum Alloy Steel (Pre-hardened 28-32 HRC) with a 3/8" (0.375 in) end mill?
What table feed rate and chip load should I program for 3/8" (0.375 in) in 4140 Chromium-Molybdenum Alloy Steel (Pre-hardened 28-32 HRC)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 4140 Chromium-Molybdenum Alloy Steel (Pre-hardened 28-32 HRC)?
Recent Calculations
No recent calculations saved yet.