7075-T6 Aerospace Aluminum — 1/4" (0.250 in) 2-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 7075-T6 Aerospace Aluminum with a 1/4" (0.250 in) 2-flute TiAlN carbide end mill, the recommended spindle speed is 29,074 RPM at 580 m/min (1902.9 SFM), with a profiling feed rate of 2,058 mm/min (80.8 IPM) and adjusted chip load of 0.0354 mm/tooth, achieving a material removal rate of 31.15 cm³/min (1.9 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math7075-T6 Aerospace Aluminum (1/4" (0.250 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 6.35 mm | 3.17 mm | 1× | 1,337 | 52.9 | 26.91 | 0.48 |
| Slotting (100% WOC) | 3F | 6.35 mm | 3.17 mm | 1× | 2,006 | 79.4 | 40.38 | 0.72 |
| Slotting (100% WOC) | 4F | 6.35 mm | 3.17 mm | 1× | 2,675 | 105.8 | 53.85 | 0.95 |
| Profiling / HEM (25% WOC) CURRENT | 2F | 1.59 mm | 9.52 mm | 1.1541× | 2,058 | 80.8 | 31.15 | 0.55 |
| Profiling / HEM (25% WOC) | 3F | 1.59 mm | 9.52 mm | 1.1541× | 3,088 | 121.2 | 46.74 | 0.83 |
| Profiling / HEM (25% WOC) | 4F | 1.59 mm | 9.52 mm | 1.1541× | 4,117 | 161.7 | 62.32 | 1.1 |
| Adaptive Clearing (10% WOC) | 2F | 0.64 mm | 12.7 mm | 1.6609× | 2,966 | 116.9 | 24.11 | 0.43 |
| Adaptive Clearing (10% WOC) | 3F | 0.64 mm | 12.7 mm | 1.6609× | 4,448 | 175.3 | 36.15 | 0.64 |
| Adaptive Clearing (10% WOC) | 4F | 0.64 mm | 12.7 mm | 1.6609× | 5,931 | 233.8 | 48.21 | 0.85 |
Shop-Floor Machining Strategy for 7075-T6 Aerospace Aluminum
Work Hardening: LowFlood Coolant with 8-10% Synthetic Soluble Oil Concentration
Pressure: Standard flood (5 bar minimum)
Zinc-alloyed aluminum chips break cleaner than 6061, with superior surface finish.
Chip Flow: Excellent short crisp chips compared to 6061. Can run 3-flute tools at aggressive feeds.
Milling Direction: Climb milling gives mirror surface finishes.
- High zinc content gives higher tensile strength; chips shear off crisply.
- Maintain tool rigidity; deflection causes dimensional drift on tight aerospace tolerances.
- Ideal candidate for High-Speed Machining (HSM) with high axial depth and light radial stepover.
Frequently Asked CNC Questions (7075-T6 Aerospace Aluminum / 1/4" (0.250 in))
What is the recommended RPM for milling 7075-T6 Aerospace Aluminum with a 1/4" (0.250 in) end mill?
What table feed rate and chip load should I program for 1/4" (0.250 in) in 7075-T6 Aerospace Aluminum?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 7075-T6 Aerospace Aluminum?
Recent Calculations
No recent calculations saved yet.