7075-T6 Aerospace Aluminum — 3/8" (0.375 in) 2-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 7075-T6 Aerospace Aluminum with a 3/8" (0.375 in) 2-flute TiAlN carbide end mill, the recommended spindle speed is 19,383 RPM at 580 m/min (1902.9 SFM), with a profiling feed rate of 1,903 mm/min (74.8 IPM) and adjusted chip load of 0.0491 mm/tooth, achieving a material removal rate of 64.72 cm³/min (3.94 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math7075-T6 Aerospace Aluminum (3/8" (0.375 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 9.53 mm | 4.76 mm | 1× | 1,237 | 48.8 | 56.11 | 0.99 |
| Slotting (100% WOC) | 3F | 9.53 mm | 4.76 mm | 1× | 1,855 | 73.3 | 84.15 | 1.49 |
| Slotting (100% WOC) | 4F | 9.53 mm | 4.76 mm | 1× | 2,473 | 97.7 | 112.18 | 1.99 |
| Profiling / HEM (25% WOC) CURRENT | 2F | 2.38 mm | 14.29 mm | 1.1549× | 1,903 | 74.8 | 64.72 | 1.15 |
| Profiling / HEM (25% WOC) | 3F | 2.38 mm | 14.29 mm | 1.1549× | 2,855 | 112.2 | 97.1 | 1.72 |
| Profiling / HEM (25% WOC) | 4F | 2.38 mm | 14.29 mm | 1.1549× | 3,807 | 149.6 | 129.48 | 2.29 |
| Adaptive Clearing (10% WOC) | 2F | 0.95 mm | 19.05 mm | 1.6686× | 2,749 | 108.2 | 49.75 | 0.88 |
| Adaptive Clearing (10% WOC) | 3F | 0.95 mm | 19.05 mm | 1.6686× | 4,123 | 162.2 | 74.62 | 1.32 |
| Adaptive Clearing (10% WOC) | 4F | 0.95 mm | 19.05 mm | 1.6686× | 5,497 | 216.3 | 99.48 | 1.76 |
Shop-Floor Machining Strategy for 7075-T6 Aerospace Aluminum
Work Hardening: LowFlood Coolant with 8-10% Synthetic Soluble Oil Concentration
Pressure: Standard flood (5 bar minimum)
Zinc-alloyed aluminum chips break cleaner than 6061, with superior surface finish.
Chip Flow: Excellent short crisp chips compared to 6061. Can run 3-flute tools at aggressive feeds.
Milling Direction: Climb milling gives mirror surface finishes.
- High zinc content gives higher tensile strength; chips shear off crisply.
- Maintain tool rigidity; deflection causes dimensional drift on tight aerospace tolerances.
- Ideal candidate for High-Speed Machining (HSM) with high axial depth and light radial stepover.
Frequently Asked CNC Questions (7075-T6 Aerospace Aluminum / 3/8" (0.375 in))
What is the recommended RPM for milling 7075-T6 Aerospace Aluminum with a 3/8" (0.375 in) end mill?
What table feed rate and chip load should I program for 3/8" (0.375 in) in 7075-T6 Aerospace Aluminum?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 7075-T6 Aerospace Aluminum?
Recent Calculations
No recent calculations saved yet.