7075-T6 Aerospace Aluminum — 16 mm 4-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 7075-T6 Aerospace Aluminum with a 16 mm 4-flute TiAlN carbide end mill, the recommended spindle speed is 11,539 RPM at 580 m/min (1902.9 SFM), with a profiling feed rate of 3,425 mm/min (134.8 IPM) and adjusted chip load of 0.0742 mm/tooth, achieving a material removal rate of 328.8 cm³/min (20.06 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math7075-T6 Aerospace Aluminum (16 mm) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 16 mm | 8 mm | 1× | 1,112 | 43.8 | 142.34 | 2.52 |
| Slotting (100% WOC) | 3F | 16 mm | 8 mm | 1× | 1,669 | 65.8 | 213.63 | 3.78 |
| Slotting (100% WOC) | 4F | 16 mm | 8 mm | 1× | 2,225 | 87.7 | 284.8 | 5.04 |
| Profiling / HEM (25% WOC) | 2F | 4 mm | 24 mm | 1.1547× | 1,712 | 67.4 | 164.35 | 2.91 |
| Profiling / HEM (25% WOC) | 3F | 4 mm | 24 mm | 1.1547× | 2,569 | 101.1 | 246.62 | 4.37 |
| Profiling / HEM (25% WOC) CURRENT | 4F | 4 mm | 24 mm | 1.1547× | 3,425 | 134.8 | 328.8 | 5.82 |
| Adaptive Clearing (10% WOC) | 2F | 1.6 mm | 32 mm | 1.6667× | 2,474 | 97.4 | 126.67 | 2.24 |
| Adaptive Clearing (10% WOC) | 3F | 1.6 mm | 32 mm | 1.6667× | 3,711 | 146.1 | 190 | 3.36 |
| Adaptive Clearing (10% WOC) | 4F | 1.6 mm | 32 mm | 1.6667× | 4,948 | 194.8 | 253.34 | 4.49 |
Shop-Floor Machining Strategy for 7075-T6 Aerospace Aluminum
Work Hardening: LowFlood Coolant with 8-10% Synthetic Soluble Oil Concentration
Pressure: Standard flood (5 bar minimum)
Zinc-alloyed aluminum chips break cleaner than 6061, with superior surface finish.
Chip Flow: Excellent short crisp chips compared to 6061. Can run 3-flute tools at aggressive feeds.
Milling Direction: Climb milling gives mirror surface finishes.
- High zinc content gives higher tensile strength; chips shear off crisply.
- Maintain tool rigidity; deflection causes dimensional drift on tight aerospace tolerances.
- Ideal candidate for High-Speed Machining (HSM) with high axial depth and light radial stepover.
Frequently Asked CNC Questions (7075-T6 Aerospace Aluminum / 16 mm)
What is the recommended RPM for milling 7075-T6 Aerospace Aluminum with a 16 mm end mill?
What table feed rate and chip load should I program for 16 mm in 7075-T6 Aerospace Aluminum?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 7075-T6 Aerospace Aluminum?
Recent Calculations
No recent calculations saved yet.