7075-T6 Aerospace Aluminum — 4 mm 2-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 7075-T6 Aerospace Aluminum with a 4 mm 2-flute TiAlN carbide end mill, the recommended spindle speed is 46,155 RPM at 580 m/min (1902.9 SFM), with a profiling feed rate of 2,262 mm/min (88.6 IPM) and adjusted chip load of 0.0245 mm/tooth, achieving a material removal rate of 13.57 cm³/min (0.82 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math7075-T6 Aerospace Aluminum (4 mm) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 4 mm | 2 mm | 1× | 1,468 | 58.2 | 11.74 | 0.21 |
| Slotting (100% WOC) | 3F | 4 mm | 2 mm | 1× | 2,202 | 87.2 | 17.62 | 0.31 |
| Slotting (100% WOC) | 4F | 4 mm | 2 mm | 1× | 2,935 | 116.3 | 23.48 | 0.42 |
| Profiling / HEM (25% WOC) CURRENT | 2F | 1 mm | 6 mm | 1.1547× | 2,262 | 88.6 | 13.57 | 0.24 |
| Profiling / HEM (25% WOC) | 3F | 1 mm | 6 mm | 1.1547× | 3,392 | 132.9 | 20.35 | 0.36 |
| Profiling / HEM (25% WOC) | 4F | 1 mm | 6 mm | 1.1547× | 4,523 | 177.2 | 27.14 | 0.48 |
| Adaptive Clearing (10% WOC) | 2F | 0.4 mm | 8 mm | 1.6667× | 3,259 | 128.3 | 10.43 | 0.18 |
| Adaptive Clearing (10% WOC) | 3F | 0.4 mm | 8 mm | 1.6667× | 4,888 | 192.5 | 15.64 | 0.28 |
| Adaptive Clearing (10% WOC) | 4F | 0.4 mm | 8 mm | 1.6667× | 6,517 | 256.6 | 20.85 | 0.37 |
Shop-Floor Machining Strategy for 7075-T6 Aerospace Aluminum
Work Hardening: LowFlood Coolant with 8-10% Synthetic Soluble Oil Concentration
Pressure: Standard flood (5 bar minimum)
Zinc-alloyed aluminum chips break cleaner than 6061, with superior surface finish.
Chip Flow: Excellent short crisp chips compared to 6061. Can run 3-flute tools at aggressive feeds.
Milling Direction: Climb milling gives mirror surface finishes.
- High zinc content gives higher tensile strength; chips shear off crisply.
- Maintain tool rigidity; deflection causes dimensional drift on tight aerospace tolerances.
- Ideal candidate for High-Speed Machining (HSM) with high axial depth and light radial stepover.
Frequently Asked CNC Questions (7075-T6 Aerospace Aluminum / 4 mm)
What is the recommended RPM for milling 7075-T6 Aerospace Aluminum with a 4 mm end mill?
What table feed rate and chip load should I program for 4 mm in 7075-T6 Aerospace Aluminum?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 7075-T6 Aerospace Aluminum?
Recent Calculations
No recent calculations saved yet.