C36000 Free-Cutting Brass — 10 mm 3-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling C36000 Free-Cutting Brass with a 10 mm 3-flute TiAlN carbide end mill, the recommended spindle speed is 13,369 RPM at 420 m/min (1378 SFM), with a profiling feed rate of 1,897 mm/min (74.6 IPM) and adjusted chip load of 0.0473 mm/tooth, achieving a material removal rate of 71.14 cm³/min (4.34 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting MathC36000 Free-Cutting Brass (10 mm) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 10 mm | 5 mm | 1× | 824 | 32.4 | 41.2 | 0.64 |
| Slotting (100% WOC) | 3F | 10 mm | 5 mm | 1× | 1,235 | 48.5 | 61.75 | 0.96 |
| Slotting (100% WOC) | 4F | 10 mm | 5 mm | 1× | 1,647 | 64.7 | 82.35 | 1.29 |
| Profiling / HEM (25% WOC) | 2F | 2.5 mm | 15 mm | 1.1547× | 1,265 | 49.7 | 47.44 | 0.74 |
| Profiling / HEM (25% WOC) CURRENT | 3F | 2.5 mm | 15 mm | 1.1547× | 1,897 | 74.6 | 71.14 | 1.11 |
| Profiling / HEM (25% WOC) | 4F | 2.5 mm | 15 mm | 1.1547× | 2,529 | 99.5 | 94.84 | 1.48 |
| Adaptive Clearing (10% WOC) | 2F | 1 mm | 20 mm | 1.6667× | 1,826 | 71.9 | 36.52 | 0.57 |
| Adaptive Clearing (10% WOC) | 3F | 1 mm | 20 mm | 1.6667× | 2,739 | 107.9 | 54.78 | 0.86 |
| Adaptive Clearing (10% WOC) | 4F | 1 mm | 20 mm | 1.6667× | 3,652 | 143.9 | 73.04 | 1.14 |
Shop-Floor Machining Strategy for C36000 Free-Cutting Brass
Work Hardening: Very LowDry with Air Blast or Light Soluble Flood Coolant
Pressure: Air blast at 4-6 bar
Machines exceptionally well dry; lead micro-particles act as internal solid lubricant.
Chip Flow: Produces broken powdery needle chips. Air blast keeps work area clear.
Milling Direction: Both climb and conventional work, but climb produces superior Ra finish.
- Zero rake angle or slightly positive rake tooling prevents cutter self-feeding/grabbing into the material.
- Spindle speeds can be maxed out on modern CNC centers.
- Clean chip trays frequently as needle brass chips can clog sump pumps.
Frequently Asked CNC Questions (C36000 Free-Cutting Brass / 10 mm)
What is the recommended RPM for milling C36000 Free-Cutting Brass with a 10 mm end mill?
What table feed rate and chip load should I program for 10 mm in C36000 Free-Cutting Brass?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining C36000 Free-Cutting Brass?
Recent Calculations
No recent calculations saved yet.