C36000 Free-Cutting Brass — 16 mm 2-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling C36000 Free-Cutting Brass with a 16 mm 2-flute TiAlN carbide end mill, the recommended spindle speed is 8,356 RPM at 420 m/min (1378 SFM), with a profiling feed rate of 1,151 mm/min (45.3 IPM) and adjusted chip load of 0.0689 mm/tooth, achieving a material removal rate of 110.5 cm³/min (6.74 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting MathC36000 Free-Cutting Brass (16 mm) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 16 mm | 8 mm | 1× | 749 | 29.4 | 95.87 | 1.5 |
| Slotting (100% WOC) | 3F | 16 mm | 8 mm | 1× | 1,123 | 44.1 | 143.74 | 2.25 |
| Slotting (100% WOC) | 4F | 16 mm | 8 mm | 1× | 1,497 | 58.8 | 191.62 | 2.99 |
| Profiling / HEM (25% WOC) CURRENT | 2F | 4 mm | 24 mm | 1.1547× | 1,151 | 45.3 | 110.5 | 1.73 |
| Profiling / HEM (25% WOC) | 3F | 4 mm | 24 mm | 1.1547× | 1,727 | 67.9 | 165.79 | 2.59 |
| Profiling / HEM (25% WOC) | 4F | 4 mm | 24 mm | 1.1547× | 2,303 | 90.6 | 221.09 | 3.45 |
| Adaptive Clearing (10% WOC) | 2F | 1.6 mm | 32 mm | 1.6667× | 1,663 | 65.5 | 85.15 | 1.33 |
| Adaptive Clearing (10% WOC) | 3F | 1.6 mm | 32 mm | 1.6667× | 2,494 | 98.3 | 127.69 | 2 |
| Adaptive Clearing (10% WOC) | 4F | 1.6 mm | 32 mm | 1.6667× | 3,326 | 131 | 170.29 | 2.66 |
Shop-Floor Machining Strategy for C36000 Free-Cutting Brass
Work Hardening: Very LowDry with Air Blast or Light Soluble Flood Coolant
Pressure: Air blast at 4-6 bar
Machines exceptionally well dry; lead micro-particles act as internal solid lubricant.
Chip Flow: Produces broken powdery needle chips. Air blast keeps work area clear.
Milling Direction: Both climb and conventional work, but climb produces superior Ra finish.
- Zero rake angle or slightly positive rake tooling prevents cutter self-feeding/grabbing into the material.
- Spindle speeds can be maxed out on modern CNC centers.
- Clean chip trays frequently as needle brass chips can clog sump pumps.
Frequently Asked CNC Questions (C36000 Free-Cutting Brass / 16 mm)
What is the recommended RPM for milling C36000 Free-Cutting Brass with a 16 mm end mill?
What table feed rate and chip load should I program for 16 mm in C36000 Free-Cutting Brass?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining C36000 Free-Cutting Brass?
Recent Calculations
No recent calculations saved yet.