C36000 Free-Cutting Brass — 20 mm 4-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling C36000 Free-Cutting Brass with a 20 mm 4-flute TiAlN carbide end mill, the recommended spindle speed is 6,685 RPM at 420 m/min (1378 SFM), with a profiling feed rate of 2,203 mm/min (86.6 IPM) and adjusted chip load of 0.0824 mm/tooth, achieving a material removal rate of 330.45 cm³/min (20.14 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting MathC36000 Free-Cutting Brass (20 mm) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 20 mm | 10 mm | 1× | 717 | 28.2 | 143.4 | 2.24 |
| Slotting (100% WOC) | 3F | 20 mm | 10 mm | 1× | 1,075 | 42.3 | 215 | 3.36 |
| Slotting (100% WOC) | 4F | 20 mm | 10 mm | 1× | 1,433 | 56.4 | 286.6 | 4.48 |
| Profiling / HEM (25% WOC) | 2F | 5 mm | 30 mm | 1.1547× | 1,102 | 43.3 | 165.3 | 2.58 |
| Profiling / HEM (25% WOC) | 3F | 5 mm | 30 mm | 1.1547× | 1,653 | 65 | 247.95 | 3.87 |
| Profiling / HEM (25% WOC) CURRENT | 4F | 5 mm | 30 mm | 1.1547× | 2,203 | 86.6 | 330.45 | 5.16 |
| Adaptive Clearing (10% WOC) | 2F | 2 mm | 40 mm | 1.6667× | 1,591 | 62.7 | 127.28 | 1.99 |
| Adaptive Clearing (10% WOC) | 3F | 2 mm | 40 mm | 1.6667× | 2,387 | 94.1 | 190.96 | 2.98 |
| Adaptive Clearing (10% WOC) | 4F | 2 mm | 40 mm | 1.6667× | 3,182 | 125.4 | 254.56 | 3.98 |
Shop-Floor Machining Strategy for C36000 Free-Cutting Brass
Work Hardening: Very LowDry with Air Blast or Light Soluble Flood Coolant
Pressure: Air blast at 4-6 bar
Machines exceptionally well dry; lead micro-particles act as internal solid lubricant.
Chip Flow: Produces broken powdery needle chips. Air blast keeps work area clear.
Milling Direction: Both climb and conventional work, but climb produces superior Ra finish.
- Zero rake angle or slightly positive rake tooling prevents cutter self-feeding/grabbing into the material.
- Spindle speeds can be maxed out on modern CNC centers.
- Clean chip trays frequently as needle brass chips can clog sump pumps.
Frequently Asked CNC Questions (C36000 Free-Cutting Brass / 20 mm)
What is the recommended RPM for milling C36000 Free-Cutting Brass with a 20 mm end mill?
What table feed rate and chip load should I program for 20 mm in C36000 Free-Cutting Brass?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining C36000 Free-Cutting Brass?
Recent Calculations
No recent calculations saved yet.