C36000 Free-Cutting Brass — 3/16" (0.1875 in) 4-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling C36000 Free-Cutting Brass with a 3/16" (0.1875 in) 4-flute TiAlN carbide end mill, the recommended spindle speed is 28,074 RPM at 420 m/min (1378 SFM), with a profiling feed rate of 2,942 mm/min (115.7 IPM) and adjusted chip load of 0.0262 mm/tooth, achieving a material removal rate of 25 cm³/min (1.53 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting MathC36000 Free-Cutting Brass (3/16" (0.1875 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 4.76 mm | 2.38 mm | 1× | 955 | 37.6 | 10.82 | 0.17 |
| Slotting (100% WOC) | 3F | 4.76 mm | 2.38 mm | 1× | 1,432 | 56.4 | 16.22 | 0.25 |
| Slotting (100% WOC) | 4F | 4.76 mm | 2.38 mm | 1× | 1,909 | 75.2 | 21.63 | 0.34 |
| Profiling / HEM (25% WOC) | 2F | 1.19 mm | 7.14 mm | 1.1549× | 1,471 | 57.8 | 12.5 | 0.2 |
| Profiling / HEM (25% WOC) | 3F | 1.19 mm | 7.14 mm | 1.1549× | 2,207 | 86.7 | 18.75 | 0.29 |
| Profiling / HEM (25% WOC) CURRENT | 4F | 1.19 mm | 7.14 mm | 1.1549× | 2,942 | 115.7 | 25 | 0.39 |
| Adaptive Clearing (10% WOC) | 2F | 0.48 mm | 9.52 mm | 1.6608× | 2,117 | 83.1 | 9.67 | 0.15 |
| Adaptive Clearing (10% WOC) | 3F | 0.48 mm | 9.52 mm | 1.6608× | 3,175 | 124.6 | 14.51 | 0.23 |
| Adaptive Clearing (10% WOC) | 4F | 0.48 mm | 9.52 mm | 1.6608× | 4,234 | 166.2 | 19.35 | 0.3 |
Shop-Floor Machining Strategy for C36000 Free-Cutting Brass
Work Hardening: Very LowDry with Air Blast or Light Soluble Flood Coolant
Pressure: Air blast at 4-6 bar
Machines exceptionally well dry; lead micro-particles act as internal solid lubricant.
Chip Flow: Produces broken powdery needle chips. Air blast keeps work area clear.
Milling Direction: Both climb and conventional work, but climb produces superior Ra finish.
- Zero rake angle or slightly positive rake tooling prevents cutter self-feeding/grabbing into the material.
- Spindle speeds can be maxed out on modern CNC centers.
- Clean chip trays frequently as needle brass chips can clog sump pumps.
Frequently Asked CNC Questions (C36000 Free-Cutting Brass / 3/16" (0.1875 in))
What is the recommended RPM for milling C36000 Free-Cutting Brass with a 3/16" (0.1875 in) end mill?
What table feed rate and chip load should I program for 3/16" (0.1875 in) in C36000 Free-Cutting Brass?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining C36000 Free-Cutting Brass?
Recent Calculations
No recent calculations saved yet.