C36000 Free-Cutting Brass — 3/4" (0.750 in) 4-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling C36000 Free-Cutting Brass with a 3/4" (0.750 in) 4-flute TiAlN carbide end mill, the recommended spindle speed is 7,018 RPM at 420 m/min (1378 SFM), with a profiling feed rate of 2,226 mm/min (87.6 IPM) and adjusted chip load of 0.0793 mm/tooth, achieving a material removal rate of 302.83 cm³/min (18.47 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting MathC36000 Free-Cutting Brass (3/4" (0.750 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 19.05 mm | 9.53 mm | 1× | 723 | 28.5 | 131.26 | 2.05 |
| Slotting (100% WOC) | 3F | 19.05 mm | 9.53 mm | 1× | 1,084 | 42.7 | 196.8 | 3.07 |
| Slotting (100% WOC) | 4F | 19.05 mm | 9.53 mm | 1× | 1,446 | 57 | 262.52 | 4.1 |
| Profiling / HEM (25% WOC) | 2F | 4.76 mm | 28.58 mm | 1.1549× | 1,113 | 43.8 | 151.41 | 2.37 |
| Profiling / HEM (25% WOC) | 3F | 4.76 mm | 28.58 mm | 1.1549× | 1,670 | 65.7 | 227.19 | 3.55 |
| Profiling / HEM (25% WOC) CURRENT | 4F | 4.76 mm | 28.58 mm | 1.1549× | 2,226 | 87.6 | 302.83 | 4.73 |
| Adaptive Clearing (10% WOC) | 2F | 1.91 mm | 38.1 mm | 1.6647× | 1,606 | 63.2 | 116.87 | 1.83 |
| Adaptive Clearing (10% WOC) | 3F | 1.91 mm | 38.1 mm | 1.6647× | 2,409 | 94.7 | 175.31 | 2.74 |
| Adaptive Clearing (10% WOC) | 4F | 1.91 mm | 38.1 mm | 1.6647× | 3,211 | 126.3 | 233.67 | 3.65 |
Shop-Floor Machining Strategy for C36000 Free-Cutting Brass
Work Hardening: Very LowDry with Air Blast or Light Soluble Flood Coolant
Pressure: Air blast at 4-6 bar
Machines exceptionally well dry; lead micro-particles act as internal solid lubricant.
Chip Flow: Produces broken powdery needle chips. Air blast keeps work area clear.
Milling Direction: Both climb and conventional work, but climb produces superior Ra finish.
- Zero rake angle or slightly positive rake tooling prevents cutter self-feeding/grabbing into the material.
- Spindle speeds can be maxed out on modern CNC centers.
- Clean chip trays frequently as needle brass chips can clog sump pumps.
Frequently Asked CNC Questions (C36000 Free-Cutting Brass / 3/4" (0.750 in))
What is the recommended RPM for milling C36000 Free-Cutting Brass with a 3/4" (0.750 in) end mill?
What table feed rate and chip load should I program for 3/4" (0.750 in) in C36000 Free-Cutting Brass?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining C36000 Free-Cutting Brass?
Recent Calculations
No recent calculations saved yet.