C36000 Free-Cutting Brass — 3 mm 4-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling C36000 Free-Cutting Brass with a 3 mm 4-flute TiAlN carbide end mill, the recommended spindle speed is 44,563 RPM at 420 m/min (1378 SFM), with a profiling feed rate of 3,226 mm/min (126.6 IPM) and adjusted chip load of 0.0181 mm/tooth, achieving a material removal rate of 10.89 cm³/min (0.66 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting MathC36000 Free-Cutting Brass (3 mm) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 3 mm | 1.5 mm | 1× | 1,043 | 41 | 4.69 | 0.07 |
| Slotting (100% WOC) | 3F | 3 mm | 1.5 mm | 1× | 1,564 | 61.5 | 7.04 | 0.11 |
| Slotting (100% WOC) | 4F | 3 mm | 1.5 mm | 1× | 2,086 | 82 | 9.39 | 0.15 |
| Profiling / HEM (25% WOC) | 2F | 0.75 mm | 4.5 mm | 1.1547× | 1,613 | 63.3 | 5.44 | 0.09 |
| Profiling / HEM (25% WOC) | 3F | 0.75 mm | 4.5 mm | 1.1547× | 2,420 | 94.9 | 8.17 | 0.13 |
| Profiling / HEM (25% WOC) CURRENT | 4F | 0.75 mm | 4.5 mm | 1.1547× | 3,226 | 126.6 | 10.89 | 0.17 |
| Adaptive Clearing (10% WOC) | 2F | 0.3 mm | 6 mm | 1.6667× | 2,335 | 91.8 | 4.2 | 0.07 |
| Adaptive Clearing (10% WOC) | 3F | 0.3 mm | 6 mm | 1.6667× | 3,503 | 137.7 | 6.31 | 0.1 |
| Adaptive Clearing (10% WOC) | 4F | 0.3 mm | 6 mm | 1.6667× | 4,670 | 183.6 | 8.41 | 0.13 |
Shop-Floor Machining Strategy for C36000 Free-Cutting Brass
Work Hardening: Very LowDry with Air Blast or Light Soluble Flood Coolant
Pressure: Air blast at 4-6 bar
Machines exceptionally well dry; lead micro-particles act as internal solid lubricant.
Chip Flow: Produces broken powdery needle chips. Air blast keeps work area clear.
Milling Direction: Both climb and conventional work, but climb produces superior Ra finish.
- Zero rake angle or slightly positive rake tooling prevents cutter self-feeding/grabbing into the material.
- Spindle speeds can be maxed out on modern CNC centers.
- Clean chip trays frequently as needle brass chips can clog sump pumps.
Frequently Asked CNC Questions (C36000 Free-Cutting Brass / 3 mm)
What is the recommended RPM for milling C36000 Free-Cutting Brass with a 3 mm end mill?
What table feed rate and chip load should I program for 3 mm in C36000 Free-Cutting Brass?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining C36000 Free-Cutting Brass?
Recent Calculations
No recent calculations saved yet.