Carbon Fiber Reinforced Polymer (CFRP Composite) — 5/8" (0.625 in) 2-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling Carbon Fiber Reinforced Polymer (CFRP Composite) with a 5/8" (0.625 in) 2-flute TiAlN carbide end mill, the recommended spindle speed is 3,810 RPM at 190 m/min (623.4 SFM), with a profiling feed rate of 281 mm/min (11 IPM) and adjusted chip load of 0.0369 mm/tooth, achieving a material removal rate of 26.56 cm³/min (1.61 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting MathCarbon Fiber Reinforced Polymer (CFRP Composite) (5/8" (0.625 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 15.88 mm | 7.94 mm | 1× | 183 | 7.2 | 23.07 | 0.38 |
| Slotting (100% WOC) | 3F | 15.88 mm | 7.94 mm | 1× | 274 | 10.7 | 34.55 | 0.58 |
| Slotting (100% WOC) | 4F | 15.88 mm | 7.94 mm | 1× | 366 | 14.3 | 46.15 | 0.77 |
| Profiling / HEM (25% WOC) CURRENT | 2F | 3.97 mm | 23.81 mm | 1.1546× | 281 | 11 | 26.56 | 0.44 |
| Profiling / HEM (25% WOC) | 3F | 3.97 mm | 23.81 mm | 1.1546× | 422 | 16.6 | 39.89 | 0.66 |
| Profiling / HEM (25% WOC) | 4F | 3.97 mm | 23.81 mm | 1.1546× | 562 | 22.1 | 53.12 | 0.89 |
| Adaptive Clearing (10% WOC) | 2F | 1.59 mm | 31.75 mm | 1.6655× | 406 | 16 | 20.5 | 0.34 |
| Adaptive Clearing (10% WOC) | 3F | 1.59 mm | 31.75 mm | 1.6655× | 609 | 24 | 30.74 | 0.51 |
| Adaptive Clearing (10% WOC) | 4F | 1.59 mm | 31.75 mm | 1.6655× | 812 | 32 | 40.99 | 0.68 |
Shop-Floor Machining Strategy for Carbon Fiber Reinforced Polymer (CFRP Composite)
Work Hardening: Severe abrasive flank wear; abrasive carbon fibers act like grinding grit.Dry with High-Velocity HEPA Downdraft Dust Collection or DI Water Flood
Pressure: HEPA vacuum pickup nozzle positioned directly at tool tip
WARNING: Airborne carbon dust is electrically conductive (destroys CNC electronics) and an inhalation health hazard. Standard coolant creates a sludge that must be specialty filtered.
Chip Flow: Carbon fiber does not form chips; it fractures into abrasive micro-powder.
Milling Direction: Compression style (upcut/downcut burr-style) tooling prevents top/bottom ply delamination.
- Use PCD (polycrystalline diamond) or thick CVD diamond-coated compression router bits.
- Compression geometry forces top plies downward and bottom plies upward into the part core, eliminating delamination.
- Inspect cutting edges frequently; worn cutters will tear and push fibers rather than shearing them cleanly.
Frequently Asked CNC Questions (Carbon Fiber Reinforced Polymer (CFRP Composite) / 5/8" (0.625 in))
What is the recommended RPM for milling Carbon Fiber Reinforced Polymer (CFRP Composite) with a 5/8" (0.625 in) end mill?
What table feed rate and chip load should I program for 5/8" (0.625 in) in Carbon Fiber Reinforced Polymer (CFRP Composite)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining Carbon Fiber Reinforced Polymer (CFRP Composite)?
Recent Calculations
No recent calculations saved yet.