Polycarbonate (Lexan / PC Thermoplastic) — 3/16" (0.1875 in) 4-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling Polycarbonate (Lexan / PC Thermoplastic) with a 3/16" (0.1875 in) 4-flute TiAlN carbide end mill, the recommended spindle speed is 25,401 RPM at 380 m/min (1246.7 SFM), with a profiling feed rate of 3,058 mm/min (120.9 IPM) and adjusted chip load of 0.0301 mm/tooth, achieving a material removal rate of 25.98 cm³/min (1.59 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting MathPolycarbonate (Lexan / PC Thermoplastic) (3/16" (0.1875 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 4.76 mm | 2.38 mm | 1× | 996 | 39.1 | 11.28 | 0.07 |
| Slotting (100% WOC) | 3F | 4.76 mm | 2.38 mm | 1× | 1,494 | 58.7 | 16.93 | 0.11 |
| Slotting (100% WOC) | 4F | 4.76 mm | 2.38 mm | 1× | 1,991 | 78.2 | 22.56 | 0.14 |
| Profiling / HEM (25% WOC) | 2F | 1.19 mm | 7.14 mm | 1.1549× | 1,529 | 60.5 | 12.99 | 0.08 |
| Profiling / HEM (25% WOC) | 3F | 1.19 mm | 7.14 mm | 1.1549× | 2,294 | 90.7 | 19.49 | 0.12 |
| Profiling / HEM (25% WOC) CURRENT | 4F | 1.19 mm | 7.14 mm | 1.1549× | 3,058 | 120.9 | 25.98 | 0.16 |
| Adaptive Clearing (10% WOC) | 2F | 0.48 mm | 9.52 mm | 1.6608× | 2,200 | 86.4 | 10.05 | 0.06 |
| Adaptive Clearing (10% WOC) | 3F | 0.48 mm | 9.52 mm | 1.6608× | 3,300 | 129.5 | 15.08 | 0.09 |
| Adaptive Clearing (10% WOC) | 4F | 0.48 mm | 9.52 mm | 1.6608× | 4,399 | 172.7 | 20.1 | 0.13 |
Shop-Floor Machining Strategy for Polycarbonate (Lexan / PC Thermoplastic)
Work Hardening: None (High internal residual stress from extrusion)Cold Air Blast Only or Pure Deionized Water
Pressure: Cold air gun at 5 bar
CRITICAL: Never expose polycarbonate to petroleum, synthetic cutting oils, or chemical solvents. Chemical exposure induces immediate catastrophic stress crazing and micro-fractures.
Chip Flow: Clean crisp plastic chips; air blast prevents chip recutting on optical surfaces.
Milling Direction: Climb milling mandatory to avoid chipping edge breakout.
- Maintain sharp high-rake tools; dull tools induce severe internal residual stress that causes delayed part cracking.
- Anneal machined parts at 120°C (250°F) for 2 hours if maximum impact strength is required.
- Use protective masking film on sheet surfaces to prevent surface scratches from chip wash.
Frequently Asked CNC Questions (Polycarbonate (Lexan / PC Thermoplastic) / 3/16" (0.1875 in))
What is the recommended RPM for milling Polycarbonate (Lexan / PC Thermoplastic) with a 3/16" (0.1875 in) end mill?
What table feed rate and chip load should I program for 3/16" (0.1875 in) in Polycarbonate (Lexan / PC Thermoplastic)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining Polycarbonate (Lexan / PC Thermoplastic)?
Recent Calculations
No recent calculations saved yet.