1018 Mild Carbon Steel (Cold Rolled) — 3/16" (0.1875 in) 3-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 1018 Mild Carbon Steel (Cold Rolled) with a 3/16" (0.1875 in) 3-flute TiAlN carbide end mill, the recommended spindle speed is 16,042 RPM at 240 m/min (787.4 SFM), with a profiling feed rate of 1,068 mm/min (41.9 IPM) and adjusted chip load of 0.0222 mm/tooth, achieving a material removal rate of 9.07 cm³/min (0.55 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math1018 Mild Carbon Steel (Cold Rolled) (3/16" (0.1875 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 4.76 mm | 2.38 mm | 1× | 462 | 18.3 | 5.23 | 0.16 |
| Slotting (100% WOC) | 3F | 4.76 mm | 2.38 mm | 1× | 693 | 27.4 | 7.85 | 0.25 |
| Slotting (100% WOC) | 4F | 4.76 mm | 2.38 mm | 1× | 924 | 36.6 | 10.47 | 0.33 |
| Profiling / HEM (25% WOC) | 2F | 1.19 mm | 7.14 mm | 1.1549× | 712 | 27.9 | 6.05 | 0.19 |
| Profiling / HEM (25% WOC) CURRENT | 3F | 1.19 mm | 7.14 mm | 1.1549× | 1,068 | 41.9 | 9.07 | 0.28 |
| Profiling / HEM (25% WOC) | 4F | 1.19 mm | 7.14 mm | 1.1549× | 1,425 | 55.8 | 12.11 | 0.38 |
| Adaptive Clearing (10% WOC) | 2F | 0.48 mm | 9.52 mm | 1.6608× | 1,023 | 40.4 | 4.67 | 0.15 |
| Adaptive Clearing (10% WOC) | 3F | 0.48 mm | 9.52 mm | 1.6608× | 1,535 | 60.6 | 7.01 | 0.22 |
| Adaptive Clearing (10% WOC) | 4F | 0.48 mm | 9.52 mm | 1.6608× | 2,047 | 80.9 | 9.35 | 0.29 |
Shop-Floor Machining Strategy for 1018 Mild Carbon Steel (Cold Rolled)
Work Hardening: ModerateFlood Coolant with 7-9% Soluble Oil or Dry with Air Blast for TiAlN Carbide
Pressure: 5 to 10 bar
With TiAlN coated carbide, dry cutting with air blast prevents thermal shock cycling on cutting edges.
Chip Flow: Low carbon steel can produce continuous gummy stringers if feed rate is too low. Keep chip load elevated.
Milling Direction: Always climb mill to manage tool heat dissipation into chips.
- Avoid rubbing at low feed rates. Feed fast enough to produce C-shaped curled blue/straw chips.
- TiAlN coating thrives on heat; avoid intermittent wet cooling that causes micro-cracking.
- 4-flute end mills deliver the best surface finish and wall straightness.
Frequently Asked CNC Questions (1018 Mild Carbon Steel (Cold Rolled) / 3/16" (0.1875 in))
What is the recommended RPM for milling 1018 Mild Carbon Steel (Cold Rolled) with a 3/16" (0.1875 in) end mill?
What table feed rate and chip load should I program for 3/16" (0.1875 in) in 1018 Mild Carbon Steel (Cold Rolled)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 1018 Mild Carbon Steel (Cold Rolled)?
Recent Calculations
No recent calculations saved yet.