1018 Mild Carbon Steel (Cold Rolled) — 3/8" (0.375 in) 4-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 1018 Mild Carbon Steel (Cold Rolled) with a 3/8" (0.375 in) 4-flute TiAlN carbide end mill, the recommended spindle speed is 8,020 RPM at 240 m/min (787.4 SFM), with a profiling feed rate of 1,238 mm/min (48.8 IPM) and adjusted chip load of 0.0386 mm/tooth, achieving a material removal rate of 42.1 cm³/min (2.57 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math1018 Mild Carbon Steel (Cold Rolled) (3/8" (0.375 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 9.53 mm | 4.76 mm | 1× | 401 | 15.7 | 18.19 | 0.57 |
| Slotting (100% WOC) | 3F | 9.53 mm | 4.76 mm | 1× | 602 | 23.6 | 27.31 | 0.85 |
| Slotting (100% WOC) | 4F | 9.53 mm | 4.76 mm | 1× | 802 | 31.4 | 36.38 | 1.14 |
| Profiling / HEM (25% WOC) | 2F | 2.38 mm | 14.29 mm | 1.1549× | 619 | 24.4 | 21.05 | 0.66 |
| Profiling / HEM (25% WOC) | 3F | 2.38 mm | 14.29 mm | 1.1549× | 929 | 36.6 | 31.6 | 0.99 |
| Profiling / HEM (25% WOC) CURRENT | 4F | 2.38 mm | 14.29 mm | 1.1549× | 1,238 | 48.8 | 42.1 | 1.32 |
| Adaptive Clearing (10% WOC) | 2F | 0.95 mm | 19.05 mm | 1.6686× | 893 | 35.1 | 16.16 | 0.51 |
| Adaptive Clearing (10% WOC) | 3F | 0.95 mm | 19.05 mm | 1.6686× | 1,340 | 52.7 | 24.25 | 0.76 |
| Adaptive Clearing (10% WOC) | 4F | 0.95 mm | 19.05 mm | 1.6686× | 1,787 | 70.3 | 32.34 | 1.01 |
Shop-Floor Machining Strategy for 1018 Mild Carbon Steel (Cold Rolled)
Work Hardening: ModerateFlood Coolant with 7-9% Soluble Oil or Dry with Air Blast for TiAlN Carbide
Pressure: 5 to 10 bar
With TiAlN coated carbide, dry cutting with air blast prevents thermal shock cycling on cutting edges.
Chip Flow: Low carbon steel can produce continuous gummy stringers if feed rate is too low. Keep chip load elevated.
Milling Direction: Always climb mill to manage tool heat dissipation into chips.
- Avoid rubbing at low feed rates. Feed fast enough to produce C-shaped curled blue/straw chips.
- TiAlN coating thrives on heat; avoid intermittent wet cooling that causes micro-cracking.
- 4-flute end mills deliver the best surface finish and wall straightness.
Frequently Asked CNC Questions (1018 Mild Carbon Steel (Cold Rolled) / 3/8" (0.375 in))
What is the recommended RPM for milling 1018 Mild Carbon Steel (Cold Rolled) with a 3/8" (0.375 in) end mill?
What table feed rate and chip load should I program for 3/8" (0.375 in) in 1018 Mild Carbon Steel (Cold Rolled)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 1018 Mild Carbon Steel (Cold Rolled)?
Recent Calculations
No recent calculations saved yet.