1018 Mild Carbon Steel (Cold Rolled) — 6 mm 2-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 1018 Mild Carbon Steel (Cold Rolled) with a 6 mm 2-flute TiAlN carbide end mill, the recommended spindle speed is 12,732 RPM at 240 m/min (787.4 SFM), with a profiling feed rate of 680 mm/min (26.7 IPM) and adjusted chip load of 0.0267 mm/tooth, achieving a material removal rate of 9.18 cm³/min (0.56 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math1018 Mild Carbon Steel (Cold Rolled) (6 mm) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 6 mm | 3 mm | 1× | 441 | 17.3 | 7.94 | 0.25 |
| Slotting (100% WOC) | 3F | 6 mm | 3 mm | 1× | 661 | 26 | 11.9 | 0.37 |
| Slotting (100% WOC) | 4F | 6 mm | 3 mm | 1× | 881 | 34.6 | 15.86 | 0.5 |
| Profiling / HEM (25% WOC) CURRENT | 2F | 1.5 mm | 9 mm | 1.1547× | 680 | 26.7 | 9.18 | 0.29 |
| Profiling / HEM (25% WOC) | 3F | 1.5 mm | 9 mm | 1.1547× | 1,020 | 40.1 | 13.77 | 0.43 |
| Profiling / HEM (25% WOC) | 4F | 1.5 mm | 9 mm | 1.1547× | 1,360 | 53.5 | 18.36 | 0.57 |
| Adaptive Clearing (10% WOC) | 2F | 0.6 mm | 12 mm | 1.6667× | 980 | 38.7 | 7.06 | 0.22 |
| Adaptive Clearing (10% WOC) | 3F | 0.6 mm | 12 mm | 1.6667× | 1,471 | 58.1 | 10.59 | 0.33 |
| Adaptive Clearing (10% WOC) | 4F | 0.6 mm | 12 mm | 1.6667× | 1,961 | 77.4 | 14.12 | 0.44 |
Shop-Floor Machining Strategy for 1018 Mild Carbon Steel (Cold Rolled)
Work Hardening: ModerateFlood Coolant with 7-9% Soluble Oil or Dry with Air Blast for TiAlN Carbide
Pressure: 5 to 10 bar
With TiAlN coated carbide, dry cutting with air blast prevents thermal shock cycling on cutting edges.
Chip Flow: Low carbon steel can produce continuous gummy stringers if feed rate is too low. Keep chip load elevated.
Milling Direction: Always climb mill to manage tool heat dissipation into chips.
- Avoid rubbing at low feed rates. Feed fast enough to produce C-shaped curled blue/straw chips.
- TiAlN coating thrives on heat; avoid intermittent wet cooling that causes micro-cracking.
- 4-flute end mills deliver the best surface finish and wall straightness.
Frequently Asked CNC Questions (1018 Mild Carbon Steel (Cold Rolled) / 6 mm)
What is the recommended RPM for milling 1018 Mild Carbon Steel (Cold Rolled) with a 6 mm end mill?
What table feed rate and chip load should I program for 6 mm in 1018 Mild Carbon Steel (Cold Rolled)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 1018 Mild Carbon Steel (Cold Rolled)?
Recent Calculations
No recent calculations saved yet.