316 Marine Grade Stainless Steel (with Molybdenum) — 12 mm 2-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 316 Marine Grade Stainless Steel (with Molybdenum) with a 12 mm 2-flute TiAlN carbide end mill, the recommended spindle speed is 3,316 RPM at 125 m/min (410.1 SFM), with a profiling feed rate of 212 mm/min (8.4 IPM) and adjusted chip load of 0.032 mm/tooth, achieving a material removal rate of 11.45 cm³/min (0.7 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math316 Marine Grade Stainless Steel (with Molybdenum) (12 mm) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 12 mm | 6 mm | 1× | 138 | 5.4 | 9.94 | 0.48 |
| Slotting (100% WOC) | 3F | 12 mm | 6 mm | 1× | 207 | 8.2 | 14.9 | 0.71 |
| Slotting (100% WOC) | 4F | 12 mm | 6 mm | 1× | 276 | 10.9 | 19.87 | 0.95 |
| Profiling / HEM (25% WOC) CURRENT | 2F | 3 mm | 18 mm | 1.1547× | 212 | 8.4 | 11.45 | 0.55 |
| Profiling / HEM (25% WOC) | 3F | 3 mm | 18 mm | 1.1547× | 318 | 12.5 | 17.17 | 0.82 |
| Profiling / HEM (25% WOC) | 4F | 3 mm | 18 mm | 1.1547× | 424 | 16.7 | 22.9 | 1.1 |
| Adaptive Clearing (10% WOC) | 2F | 1.2 mm | 24 mm | 1.6667× | 306 | 12.1 | 8.81 | 0.42 |
| Adaptive Clearing (10% WOC) | 3F | 1.2 mm | 24 mm | 1.6667× | 460 | 18.1 | 13.25 | 0.63 |
| Adaptive Clearing (10% WOC) | 4F | 1.2 mm | 24 mm | 1.6667× | 613 | 24.1 | 17.65 | 0.85 |
Shop-Floor Machining Strategy for 316 Marine Grade Stainless Steel (with Molybdenum)
Work Hardening: EXTREMEHeavy Flood Coolant with Extreme Pressure (EP) Additives
Pressure: 20 bar minimum
Molybdenum addition increases chemical and high-temp shear toughness, requiring superior lubricity.
Chip Flow: High tendency for chips to weld to cutting edges if feed pauses.
Milling Direction: Mandatory climb milling.
- Reduce SFM by 10-15% compared to 304 stainless; keep chip load firm.
- Corner chamfer or radiused cutters prevent premature notch wear on the depth-of-cut line.
- Use high-feed milling or trochoidal toolpaths to spread wear along the full flute length.
Frequently Asked CNC Questions (316 Marine Grade Stainless Steel (with Molybdenum) / 12 mm)
What is the recommended RPM for milling 316 Marine Grade Stainless Steel (with Molybdenum) with a 12 mm end mill?
What table feed rate and chip load should I program for 12 mm in 316 Marine Grade Stainless Steel (with Molybdenum)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 316 Marine Grade Stainless Steel (with Molybdenum)?
Recent Calculations
No recent calculations saved yet.