316 Marine Grade Stainless Steel (with Molybdenum) — 3/8" (0.375 in) 3-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 316 Marine Grade Stainless Steel (with Molybdenum) with a 3/8" (0.375 in) 3-flute TiAlN carbide end mill, the recommended spindle speed is 4,177 RPM at 125 m/min (410.1 SFM), with a profiling feed rate of 335 mm/min (13.2 IPM) and adjusted chip load of 0.0267 mm/tooth, achieving a material removal rate of 11.39 cm³/min (0.7 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math316 Marine Grade Stainless Steel (with Molybdenum) (3/8" (0.375 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 9.53 mm | 4.76 mm | 1× | 145 | 5.7 | 6.58 | 0.32 |
| Slotting (100% WOC) | 3F | 9.53 mm | 4.76 mm | 1× | 217 | 8.5 | 9.84 | 0.47 |
| Slotting (100% WOC) | 4F | 9.53 mm | 4.76 mm | 1× | 289 | 11.4 | 13.11 | 0.63 |
| Profiling / HEM (25% WOC) | 2F | 2.38 mm | 14.29 mm | 1.1549× | 223 | 8.8 | 7.58 | 0.36 |
| Profiling / HEM (25% WOC) CURRENT | 3F | 2.38 mm | 14.29 mm | 1.1549× | 335 | 13.2 | 11.39 | 0.55 |
| Profiling / HEM (25% WOC) | 4F | 2.38 mm | 14.29 mm | 1.1549× | 446 | 17.5 | 15.17 | 0.73 |
| Adaptive Clearing (10% WOC) | 2F | 0.95 mm | 19.05 mm | 1.6686× | 322 | 12.7 | 5.83 | 0.28 |
| Adaptive Clearing (10% WOC) | 3F | 0.95 mm | 19.05 mm | 1.6686× | 482 | 19 | 8.72 | 0.42 |
| Adaptive Clearing (10% WOC) | 4F | 0.95 mm | 19.05 mm | 1.6686× | 643 | 25.4 | 11.64 | 0.56 |
Shop-Floor Machining Strategy for 316 Marine Grade Stainless Steel (with Molybdenum)
Work Hardening: EXTREMEHeavy Flood Coolant with Extreme Pressure (EP) Additives
Pressure: 20 bar minimum
Molybdenum addition increases chemical and high-temp shear toughness, requiring superior lubricity.
Chip Flow: High tendency for chips to weld to cutting edges if feed pauses.
Milling Direction: Mandatory climb milling.
- Reduce SFM by 10-15% compared to 304 stainless; keep chip load firm.
- Corner chamfer or radiused cutters prevent premature notch wear on the depth-of-cut line.
- Use high-feed milling or trochoidal toolpaths to spread wear along the full flute length.
Frequently Asked CNC Questions (316 Marine Grade Stainless Steel (with Molybdenum) / 3/8" (0.375 in))
What is the recommended RPM for milling 316 Marine Grade Stainless Steel (with Molybdenum) with a 3/8" (0.375 in) end mill?
What table feed rate and chip load should I program for 3/8" (0.375 in) in 316 Marine Grade Stainless Steel (with Molybdenum)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 316 Marine Grade Stainless Steel (with Molybdenum)?
Recent Calculations
No recent calculations saved yet.