7075-T6 Aerospace Aluminum — 1/2" (0.500 in) 3-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 7075-T6 Aerospace Aluminum with a 1/2" (0.500 in) 3-flute TiAlN carbide end mill, the recommended spindle speed is 14,537 RPM at 580 m/min (1902.9 SFM), with a profiling feed rate of 2,695 mm/min (106 IPM) and adjusted chip load of 0.0618 mm/tooth, achieving a material removal rate of 162.75 cm³/min (9.92 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math7075-T6 Aerospace Aluminum (1/2" (0.500 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 12.7 mm | 6.35 mm | 1× | 1,166 | 45.9 | 94.03 | 1.67 |
| Slotting (100% WOC) | 3F | 12.7 mm | 6.35 mm | 1× | 1,749 | 68.9 | 141.05 | 2.5 |
| Slotting (100% WOC) | 4F | 12.7 mm | 6.35 mm | 1× | 2,332 | 91.9 | 188.06 | 3.33 |
| Profiling / HEM (25% WOC) | 2F | 3.17 mm | 19.05 mm | 1.1553× | 1,797 | 70.6 | 108.52 | 1.92 |
| Profiling / HEM (25% WOC) CURRENT | 3F | 3.17 mm | 19.05 mm | 1.1553× | 2,695 | 106 | 162.75 | 2.88 |
| Profiling / HEM (25% WOC) | 4F | 3.17 mm | 19.05 mm | 1.1553× | 3,594 | 141.3 | 217.04 | 3.84 |
| Adaptive Clearing (10% WOC) | 2F | 1.27 mm | 25.4 mm | 1.6667× | 2,593 | 102 | 83.64 | 1.48 |
| Adaptive Clearing (10% WOC) | 3F | 1.27 mm | 25.4 mm | 1.6667× | 3,890 | 153.1 | 125.48 | 2.22 |
| Adaptive Clearing (10% WOC) | 4F | 1.27 mm | 25.4 mm | 1.6667× | 5,187 | 204.1 | 167.32 | 2.96 |
Shop-Floor Machining Strategy for 7075-T6 Aerospace Aluminum
Work Hardening: LowFlood Coolant with 8-10% Synthetic Soluble Oil Concentration
Pressure: Standard flood (5 bar minimum)
Zinc-alloyed aluminum chips break cleaner than 6061, with superior surface finish.
Chip Flow: Excellent short crisp chips compared to 6061. Can run 3-flute tools at aggressive feeds.
Milling Direction: Climb milling gives mirror surface finishes.
- High zinc content gives higher tensile strength; chips shear off crisply.
- Maintain tool rigidity; deflection causes dimensional drift on tight aerospace tolerances.
- Ideal candidate for High-Speed Machining (HSM) with high axial depth and light radial stepover.
Frequently Asked CNC Questions (7075-T6 Aerospace Aluminum / 1/2" (0.500 in))
What is the recommended RPM for milling 7075-T6 Aerospace Aluminum with a 1/2" (0.500 in) end mill?
What table feed rate and chip load should I program for 1/2" (0.500 in) in 7075-T6 Aerospace Aluminum?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 7075-T6 Aerospace Aluminum?
Recent Calculations
No recent calculations saved yet.