C11000 Electrolytic Tough Pitch (ETP) Copper — 3/4" (0.750 in) 3-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling C11000 Electrolytic Tough Pitch (ETP) Copper with a 3/4" (0.750 in) 3-flute TiAlN carbide end mill, the recommended spindle speed is 4,177 RPM at 250 m/min (820.2 SFM), with a profiling feed rate of 688 mm/min (27.1 IPM) and adjusted chip load of 0.0549 mm/tooth, achieving a material removal rate of 93.6 cm³/min (5.71 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting MathC11000 Electrolytic Tough Pitch (ETP) Copper (3/4" (0.750 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 19.05 mm | 9.53 mm | 1× | 298 | 11.8 | 54.1 | 1.24 |
| Slotting (100% WOC) | 3F | 19.05 mm | 9.53 mm | 1× | 447 | 17.7 | 81.15 | 1.86 |
| Slotting (100% WOC) | 4F | 19.05 mm | 9.53 mm | 1× | 596 | 23.6 | 108.2 | 2.48 |
| Profiling / HEM (25% WOC) | 2F | 4.76 mm | 28.58 mm | 1.1549× | 459 | 18 | 62.44 | 1.43 |
| Profiling / HEM (25% WOC) CURRENT | 3F | 4.76 mm | 28.58 mm | 1.1549× | 688 | 27.1 | 93.6 | 2.15 |
| Profiling / HEM (25% WOC) | 4F | 4.76 mm | 28.58 mm | 1.1549× | 917 | 36.1 | 124.75 | 2.86 |
| Adaptive Clearing (10% WOC) | 2F | 1.91 mm | 38.1 mm | 1.6647× | 661 | 26 | 48.1 | 1.1 |
| Adaptive Clearing (10% WOC) | 3F | 1.91 mm | 38.1 mm | 1.6647× | 991 | 39 | 72.12 | 1.65 |
| Adaptive Clearing (10% WOC) | 4F | 1.91 mm | 38.1 mm | 1.6647× | 1,322 | 52 | 96.2 | 2.2 |
Shop-Floor Machining Strategy for C11000 Electrolytic Tough Pitch (ETP) Copper
Work Hardening: ModerateAbundant Flood Coolant with High Lubricity Emulsion or Mineral Oil
Pressure: Flood at 8 bar minimum
Pure copper is notoriously gummy; lubrication is mandatory to prevent cold welding to cutter flutes.
Chip Flow: Long, ductile continuous ribbons. Large 1-flute or 2-flute mirror-polished end mills are required.
Milling Direction: Climb milling with high positive rake angles.
- Use polished uncoated carbide designed for aluminum/non-ferrous; razor sharp cutting edges are mandatory.
- Keep feed rate positive to shear rather than plow or smear the copper grain structure.
- Program chamfering passes immediately following roughing before secondary operations.
Frequently Asked CNC Questions (C11000 Electrolytic Tough Pitch (ETP) Copper / 3/4" (0.750 in))
What is the recommended RPM for milling C11000 Electrolytic Tough Pitch (ETP) Copper with a 3/4" (0.750 in) end mill?
What table feed rate and chip load should I program for 3/4" (0.750 in) in C11000 Electrolytic Tough Pitch (ETP) Copper?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining C11000 Electrolytic Tough Pitch (ETP) Copper?
Recent Calculations
No recent calculations saved yet.