7075-T6 Aerospace Aluminum — 3/4" (0.750 in) 3-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 7075-T6 Aerospace Aluminum with a 3/4" (0.750 in) 3-flute TiAlN carbide end mill, the recommended spindle speed is 9,691 RPM at 580 m/min (1902.9 SFM), with a profiling feed rate of 2,486 mm/min (98 IPM) and adjusted chip load of 0.0855 mm/tooth, achieving a material removal rate of 338.2 cm³/min (20.66 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math7075-T6 Aerospace Aluminum (3/4" (0.750 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 19.05 mm | 9.53 mm | 1× | 1,076 | 42.4 | 195.34 | 3.46 |
| Slotting (100% WOC) | 3F | 19.05 mm | 9.53 mm | 1× | 1,614 | 63.7 | 293.02 | 5.19 |
| Slotting (100% WOC) | 4F | 19.05 mm | 9.53 mm | 1× | 2,151 | 84.9 | 390.51 | 6.92 |
| Profiling / HEM (25% WOC) | 2F | 4.76 mm | 28.58 mm | 1.1549× | 1,657 | 65.3 | 225.42 | 3.99 |
| Profiling / HEM (25% WOC) CURRENT | 3F | 4.76 mm | 28.58 mm | 1.1549× | 2,486 | 98 | 338.2 | 5.99 |
| Profiling / HEM (25% WOC) | 4F | 4.76 mm | 28.58 mm | 1.1549× | 3,314 | 130.6 | 450.84 | 7.98 |
| Adaptive Clearing (10% WOC) | 2F | 1.91 mm | 38.1 mm | 1.6647× | 2,388 | 94 | 173.78 | 3.08 |
| Adaptive Clearing (10% WOC) | 3F | 1.91 mm | 38.1 mm | 1.6647× | 3,582 | 141 | 260.67 | 4.62 |
| Adaptive Clearing (10% WOC) | 4F | 1.91 mm | 38.1 mm | 1.6647× | 4,776 | 188 | 347.55 | 6.15 |
Shop-Floor Machining Strategy for 7075-T6 Aerospace Aluminum
Work Hardening: LowFlood Coolant with 8-10% Synthetic Soluble Oil Concentration
Pressure: Standard flood (5 bar minimum)
Zinc-alloyed aluminum chips break cleaner than 6061, with superior surface finish.
Chip Flow: Excellent short crisp chips compared to 6061. Can run 3-flute tools at aggressive feeds.
Milling Direction: Climb milling gives mirror surface finishes.
- High zinc content gives higher tensile strength; chips shear off crisply.
- Maintain tool rigidity; deflection causes dimensional drift on tight aerospace tolerances.
- Ideal candidate for High-Speed Machining (HSM) with high axial depth and light radial stepover.
Frequently Asked CNC Questions (7075-T6 Aerospace Aluminum / 3/4" (0.750 in))
What is the recommended RPM for milling 7075-T6 Aerospace Aluminum with a 3/4" (0.750 in) end mill?
What table feed rate and chip load should I program for 3/4" (0.750 in) in 7075-T6 Aerospace Aluminum?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 7075-T6 Aerospace Aluminum?
Recent Calculations
No recent calculations saved yet.