C36000 Free-Cutting Brass — 3/8" (0.375 in) 4-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling C36000 Free-Cutting Brass with a 3/8" (0.375 in) 4-flute TiAlN carbide end mill, the recommended spindle speed is 14,036 RPM at 420 m/min (1378 SFM), with a profiling feed rate of 2,555 mm/min (100.5 IPM) and adjusted chip load of 0.0455 mm/tooth, achieving a material removal rate of 86.9 cm³/min (5.3 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting MathC36000 Free-Cutting Brass (3/8" (0.375 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 9.53 mm | 4.76 mm | 1× | 831 | 32.8 | 37.7 | 0.59 |
| Slotting (100% WOC) | 3F | 9.53 mm | 4.76 mm | 1× | 1,246 | 49.3 | 56.52 | 0.88 |
| Slotting (100% WOC) | 4F | 9.53 mm | 4.76 mm | 1× | 1,662 | 65.7 | 75.39 | 1.18 |
| Profiling / HEM (25% WOC) | 2F | 2.38 mm | 14.29 mm | 1.1549× | 1,277 | 50.2 | 43.43 | 0.68 |
| Profiling / HEM (25% WOC) | 3F | 2.38 mm | 14.29 mm | 1.1549× | 1,916 | 75.4 | 65.16 | 1.02 |
| Profiling / HEM (25% WOC) CURRENT | 4F | 2.38 mm | 14.29 mm | 1.1549× | 2,555 | 100.5 | 86.9 | 1.36 |
| Adaptive Clearing (10% WOC) | 2F | 0.95 mm | 19.05 mm | 1.6686× | 1,844 | 72.7 | 33.37 | 0.52 |
| Adaptive Clearing (10% WOC) | 3F | 0.95 mm | 19.05 mm | 1.6686× | 2,766 | 109.1 | 50.06 | 0.78 |
| Adaptive Clearing (10% WOC) | 4F | 0.95 mm | 19.05 mm | 1.6686× | 3,689 | 145.4 | 66.76 | 1.04 |
Shop-Floor Machining Strategy for C36000 Free-Cutting Brass
Work Hardening: Very LowDry with Air Blast or Light Soluble Flood Coolant
Pressure: Air blast at 4-6 bar
Machines exceptionally well dry; lead micro-particles act as internal solid lubricant.
Chip Flow: Produces broken powdery needle chips. Air blast keeps work area clear.
Milling Direction: Both climb and conventional work, but climb produces superior Ra finish.
- Zero rake angle or slightly positive rake tooling prevents cutter self-feeding/grabbing into the material.
- Spindle speeds can be maxed out on modern CNC centers.
- Clean chip trays frequently as needle brass chips can clog sump pumps.
Frequently Asked CNC Questions (C36000 Free-Cutting Brass / 3/8" (0.375 in))
What is the recommended RPM for milling C36000 Free-Cutting Brass with a 3/8" (0.375 in) end mill?
What table feed rate and chip load should I program for 3/8" (0.375 in) in C36000 Free-Cutting Brass?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining C36000 Free-Cutting Brass?
Recent Calculations
No recent calculations saved yet.