Carbon Fiber Reinforced Polymer (CFRP Composite) — 3/8" (0.375 in) 2-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling Carbon Fiber Reinforced Polymer (CFRP Composite) with a 3/8" (0.375 in) 2-flute TiAlN carbide end mill, the recommended spindle speed is 6,349 RPM at 190 m/min (623.4 SFM), with a profiling feed rate of 311 mm/min (12.2 IPM) and adjusted chip load of 0.0245 mm/tooth, achieving a material removal rate of 10.58 cm³/min (0.64 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting MathCarbon Fiber Reinforced Polymer (CFRP Composite) (3/8" (0.375 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 9.53 mm | 4.76 mm | 1× | 202 | 8 | 9.16 | 0.15 |
| Slotting (100% WOC) | 3F | 9.53 mm | 4.76 mm | 1× | 303 | 12 | 13.74 | 0.23 |
| Slotting (100% WOC) | 4F | 9.53 mm | 4.76 mm | 1× | 404 | 16 | 18.33 | 0.31 |
| Profiling / HEM (25% WOC) CURRENT | 2F | 2.38 mm | 14.29 mm | 1.1549× | 311 | 12.2 | 10.58 | 0.18 |
| Profiling / HEM (25% WOC) | 3F | 2.38 mm | 14.29 mm | 1.1549× | 467 | 18.3 | 15.88 | 0.26 |
| Profiling / HEM (25% WOC) | 4F | 2.38 mm | 14.29 mm | 1.1549× | 622 | 24.4 | 21.15 | 0.35 |
| Adaptive Clearing (10% WOC) | 2F | 0.95 mm | 19.05 mm | 1.6686× | 450 | 17.7 | 8.14 | 0.14 |
| Adaptive Clearing (10% WOC) | 3F | 0.95 mm | 19.05 mm | 1.6686× | 674 | 26.5 | 12.2 | 0.2 |
| Adaptive Clearing (10% WOC) | 4F | 0.95 mm | 19.05 mm | 1.6686× | 899 | 35.3 | 16.27 | 0.27 |
Shop-Floor Machining Strategy for Carbon Fiber Reinforced Polymer (CFRP Composite)
Work Hardening: Severe abrasive flank wear; abrasive carbon fibers act like grinding grit.Dry with High-Velocity HEPA Downdraft Dust Collection or DI Water Flood
Pressure: HEPA vacuum pickup nozzle positioned directly at tool tip
WARNING: Airborne carbon dust is electrically conductive (destroys CNC electronics) and an inhalation health hazard. Standard coolant creates a sludge that must be specialty filtered.
Chip Flow: Carbon fiber does not form chips; it fractures into abrasive micro-powder.
Milling Direction: Compression style (upcut/downcut burr-style) tooling prevents top/bottom ply delamination.
- Use PCD (polycrystalline diamond) or thick CVD diamond-coated compression router bits.
- Compression geometry forces top plies downward and bottom plies upward into the part core, eliminating delamination.
- Inspect cutting edges frequently; worn cutters will tear and push fibers rather than shearing them cleanly.
Frequently Asked CNC Questions (Carbon Fiber Reinforced Polymer (CFRP Composite) / 3/8" (0.375 in))
What is the recommended RPM for milling Carbon Fiber Reinforced Polymer (CFRP Composite) with a 3/8" (0.375 in) end mill?
What table feed rate and chip load should I program for 3/8" (0.375 in) in Carbon Fiber Reinforced Polymer (CFRP Composite)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining Carbon Fiber Reinforced Polymer (CFRP Composite)?
Recent Calculations
No recent calculations saved yet.