Polycarbonate (Lexan / PC Thermoplastic) — 3/4" (0.750 in) 2-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling Polycarbonate (Lexan / PC Thermoplastic) with a 3/4" (0.750 in) 2-flute TiAlN carbide end mill, the recommended spindle speed is 6,349 RPM at 380 m/min (1246.7 SFM), with a profiling feed rate of 1,162 mm/min (45.7 IPM) and adjusted chip load of 0.0915 mm/tooth, achieving a material removal rate of 158.08 cm³/min (9.64 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting MathPolycarbonate (Lexan / PC Thermoplastic) (3/4" (0.750 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 19.05 mm | 9.53 mm | 1× | 754 | 29.7 | 136.89 | 0.86 |
| Slotting (100% WOC) | 3F | 19.05 mm | 9.53 mm | 1× | 1,131 | 44.6 | 205.33 | 1.28 |
| Slotting (100% WOC) | 4F | 19.05 mm | 9.53 mm | 1× | 1,509 | 59.4 | 273.95 | 1.71 |
| Profiling / HEM (25% WOC) CURRENT | 2F | 4.76 mm | 28.58 mm | 1.1549× | 1,162 | 45.7 | 158.08 | 0.99 |
| Profiling / HEM (25% WOC) | 3F | 4.76 mm | 28.58 mm | 1.1549× | 1,743 | 68.6 | 237.12 | 1.48 |
| Profiling / HEM (25% WOC) | 4F | 4.76 mm | 28.58 mm | 1.1549× | 2,324 | 91.4 | 316.16 | 1.98 |
| Adaptive Clearing (10% WOC) | 2F | 1.91 mm | 38.1 mm | 1.6647× | 1,674 | 65.9 | 121.82 | 0.76 |
| Adaptive Clearing (10% WOC) | 3F | 1.91 mm | 38.1 mm | 1.6647× | 2,510 | 98.9 | 182.66 | 1.14 |
| Adaptive Clearing (10% WOC) | 4F | 1.91 mm | 38.1 mm | 1.6647× | 3,347 | 131.8 | 243.56 | 1.52 |
Shop-Floor Machining Strategy for Polycarbonate (Lexan / PC Thermoplastic)
Work Hardening: None (High internal residual stress from extrusion)Cold Air Blast Only or Pure Deionized Water
Pressure: Cold air gun at 5 bar
CRITICAL: Never expose polycarbonate to petroleum, synthetic cutting oils, or chemical solvents. Chemical exposure induces immediate catastrophic stress crazing and micro-fractures.
Chip Flow: Clean crisp plastic chips; air blast prevents chip recutting on optical surfaces.
Milling Direction: Climb milling mandatory to avoid chipping edge breakout.
- Maintain sharp high-rake tools; dull tools induce severe internal residual stress that causes delayed part cracking.
- Anneal machined parts at 120°C (250°F) for 2 hours if maximum impact strength is required.
- Use protective masking film on sheet surfaces to prevent surface scratches from chip wash.
Frequently Asked CNC Questions (Polycarbonate (Lexan / PC Thermoplastic) / 3/4" (0.750 in))
What is the recommended RPM for milling Polycarbonate (Lexan / PC Thermoplastic) with a 3/4" (0.750 in) end mill?
What table feed rate and chip load should I program for 3/4" (0.750 in) in Polycarbonate (Lexan / PC Thermoplastic)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining Polycarbonate (Lexan / PC Thermoplastic)?
Recent Calculations
No recent calculations saved yet.