Polycarbonate (Lexan / PC Thermoplastic) — 3/8" (0.375 in) 3-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling Polycarbonate (Lexan / PC Thermoplastic) with a 3/8" (0.375 in) 3-flute TiAlN carbide end mill, the recommended spindle speed is 12,699 RPM at 380 m/min (1246.7 SFM), with a profiling feed rate of 2,000 mm/min (78.9 IPM) and adjusted chip load of 0.0525 mm/tooth, achieving a material removal rate of 68.02 cm³/min (4.16 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting MathPolycarbonate (Lexan / PC Thermoplastic) (3/8" (0.375 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 9.53 mm | 4.76 mm | 1× | 866 | 34 | 39.28 | 0.25 |
| Slotting (100% WOC) | 3F | 9.53 mm | 4.76 mm | 1× | 1,299 | 51 | 58.93 | 0.37 |
| Slotting (100% WOC) | 4F | 9.53 mm | 4.76 mm | 1× | 1,732 | 68.1 | 78.57 | 0.49 |
| Profiling / HEM (25% WOC) | 2F | 2.38 mm | 14.29 mm | 1.1549× | 1,333 | 52.6 | 45.34 | 0.28 |
| Profiling / HEM (25% WOC) CURRENT | 3F | 2.38 mm | 14.29 mm | 1.1549× | 2,000 | 78.9 | 68.02 | 0.43 |
| Profiling / HEM (25% WOC) | 4F | 2.38 mm | 14.29 mm | 1.1549× | 2,667 | 105.1 | 90.71 | 0.57 |
| Adaptive Clearing (10% WOC) | 2F | 0.95 mm | 19.05 mm | 1.6686× | 1,928 | 75.9 | 34.89 | 0.22 |
| Adaptive Clearing (10% WOC) | 3F | 0.95 mm | 19.05 mm | 1.6686× | 2,892 | 113.9 | 52.34 | 0.33 |
| Adaptive Clearing (10% WOC) | 4F | 0.95 mm | 19.05 mm | 1.6686× | 3,855 | 151.9 | 69.77 | 0.44 |
Shop-Floor Machining Strategy for Polycarbonate (Lexan / PC Thermoplastic)
Work Hardening: None (High internal residual stress from extrusion)Cold Air Blast Only or Pure Deionized Water
Pressure: Cold air gun at 5 bar
CRITICAL: Never expose polycarbonate to petroleum, synthetic cutting oils, or chemical solvents. Chemical exposure induces immediate catastrophic stress crazing and micro-fractures.
Chip Flow: Clean crisp plastic chips; air blast prevents chip recutting on optical surfaces.
Milling Direction: Climb milling mandatory to avoid chipping edge breakout.
- Maintain sharp high-rake tools; dull tools induce severe internal residual stress that causes delayed part cracking.
- Anneal machined parts at 120°C (250°F) for 2 hours if maximum impact strength is required.
- Use protective masking film on sheet surfaces to prevent surface scratches from chip wash.
Frequently Asked CNC Questions (Polycarbonate (Lexan / PC Thermoplastic) / 3/8" (0.375 in))
What is the recommended RPM for milling Polycarbonate (Lexan / PC Thermoplastic) with a 3/8" (0.375 in) end mill?
What table feed rate and chip load should I program for 3/8" (0.375 in) in Polycarbonate (Lexan / PC Thermoplastic)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining Polycarbonate (Lexan / PC Thermoplastic)?
Recent Calculations
No recent calculations saved yet.