1018 Mild Carbon Steel (Cold Rolled) — 3/4" (0.750 in) 3-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling 1018 Mild Carbon Steel (Cold Rolled) with a 3/4" (0.750 in) 3-flute TiAlN carbide end mill, the recommended spindle speed is 4,010 RPM at 240 m/min (787.4 SFM), with a profiling feed rate of 807 mm/min (31.8 IPM) and adjusted chip load of 0.0671 mm/tooth, achieving a material removal rate of 109.78 cm³/min (6.71 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting Math1018 Mild Carbon Steel (Cold Rolled) (3/4" (0.750 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 19.05 mm | 9.53 mm | 1× | 350 | 13.8 | 63.54 | 1.99 |
| Slotting (100% WOC) | 3F | 19.05 mm | 9.53 mm | 1× | 525 | 20.7 | 95.31 | 2.98 |
| Slotting (100% WOC) | 4F | 19.05 mm | 9.53 mm | 1× | 699 | 27.6 | 126.9 | 3.97 |
| Profiling / HEM (25% WOC) | 2F | 4.76 mm | 28.58 mm | 1.1549× | 538 | 21.2 | 73.19 | 2.29 |
| Profiling / HEM (25% WOC) CURRENT | 3F | 4.76 mm | 28.58 mm | 1.1549× | 807 | 31.8 | 109.78 | 3.43 |
| Profiling / HEM (25% WOC) | 4F | 4.76 mm | 28.58 mm | 1.1549× | 1,076 | 42.3 | 146.38 | 4.57 |
| Adaptive Clearing (10% WOC) | 2F | 1.91 mm | 38.1 mm | 1.6647× | 776 | 30.6 | 56.47 | 1.76 |
| Adaptive Clearing (10% WOC) | 3F | 1.91 mm | 38.1 mm | 1.6647× | 1,163 | 45.8 | 84.63 | 2.64 |
| Adaptive Clearing (10% WOC) | 4F | 1.91 mm | 38.1 mm | 1.6647× | 1,551 | 61.1 | 112.87 | 3.53 |
Shop-Floor Machining Strategy for 1018 Mild Carbon Steel (Cold Rolled)
Work Hardening: ModerateFlood Coolant with 7-9% Soluble Oil or Dry with Air Blast for TiAlN Carbide
Pressure: 5 to 10 bar
With TiAlN coated carbide, dry cutting with air blast prevents thermal shock cycling on cutting edges.
Chip Flow: Low carbon steel can produce continuous gummy stringers if feed rate is too low. Keep chip load elevated.
Milling Direction: Always climb mill to manage tool heat dissipation into chips.
- Avoid rubbing at low feed rates. Feed fast enough to produce C-shaped curled blue/straw chips.
- TiAlN coating thrives on heat; avoid intermittent wet cooling that causes micro-cracking.
- 4-flute end mills deliver the best surface finish and wall straightness.
Frequently Asked CNC Questions (1018 Mild Carbon Steel (Cold Rolled) / 3/4" (0.750 in))
What is the recommended RPM for milling 1018 Mild Carbon Steel (Cold Rolled) with a 3/4" (0.750 in) end mill?
What table feed rate and chip load should I program for 3/4" (0.750 in) in 1018 Mild Carbon Steel (Cold Rolled)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining 1018 Mild Carbon Steel (Cold Rolled)?
Recent Calculations
No recent calculations saved yet.