Ti-6Al-4V Titanium Alloy (Grade 5) — 1/2" (0.500 in) 2-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling Ti-6Al-4V Titanium Alloy (Grade 5) with a 1/2" (0.500 in) 2-flute TiAlN carbide end mill, the recommended spindle speed is 1,629 RPM at 65 m/min (213.3 SFM), with a profiling feed rate of 92 mm/min (3.6 IPM) and adjusted chip load of 0.0282 mm/tooth, achieving a material removal rate of 5.56 cm³/min (0.34 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting MathTi-6Al-4V Titanium Alloy (Grade 5) (1/2" (0.500 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 12.7 mm | 6.35 mm | 1× | 60 | 2.3 | 4.84 | 0.28 |
| Slotting (100% WOC) | 3F | 12.7 mm | 6.35 mm | 1× | 89 | 3.5 | 7.18 | 0.42 |
| Slotting (100% WOC) | 4F | 12.7 mm | 6.35 mm | 1× | 119 | 4.7 | 9.6 | 0.56 |
| Profiling / HEM (25% WOC) CURRENT | 2F | 3.17 mm | 19.05 mm | 1.1553× | 92 | 3.6 | 5.56 | 0.32 |
| Profiling / HEM (25% WOC) | 3F | 3.17 mm | 19.05 mm | 1.1553× | 138 | 5.4 | 8.33 | 0.49 |
| Profiling / HEM (25% WOC) | 4F | 3.17 mm | 19.05 mm | 1.1553× | 184 | 7.2 | 11.11 | 0.65 |
| Adaptive Clearing (10% WOC) | 2F | 1.27 mm | 25.4 mm | 1.6667× | 133 | 5.2 | 4.29 | 0.25 |
| Adaptive Clearing (10% WOC) | 3F | 1.27 mm | 25.4 mm | 1.6667× | 199 | 7.8 | 6.42 | 0.37 |
| Adaptive Clearing (10% WOC) | 4F | 1.27 mm | 25.4 mm | 1.6667× | 265 | 10.4 | 8.55 | 0.5 |
Shop-Floor Machining Strategy for Ti-6Al-4V Titanium Alloy (Grade 5)
Work Hardening: HighHigh-Pressure Through-Spindle Flood Coolant (70 bar / 1000 PSI)
Pressure: 70 bar through-spindle coolant mandatory for deep milling
Titanium thermal conductivity is 1/6th of steel; heat cannot dissipate into chips and concentrates directly on the cutting edge. WARNING: Dry titanium chips present a combustible metal fire hazard.
Chip Flow: Chips weld chemically to tool steel and carbide at elevated temperatures.
Milling Direction: Strict climb milling. Keep radial engagement (ae) under 20% of tool diameter.
- LOW SPEED, HIGH FEED, ABUNDANT COOLANT: The universal titanium triad.
- Arc into cuts using a roll-in programmed entry; linear plunges cause tool shock fractures.
- Never dwell in the cut; program corner deceleration cautiously to prevent tool rubbing.
Frequently Asked CNC Questions (Ti-6Al-4V Titanium Alloy (Grade 5) / 1/2" (0.500 in))
What is the recommended RPM for milling Ti-6Al-4V Titanium Alloy (Grade 5) with a 1/2" (0.500 in) end mill?
What table feed rate and chip load should I program for 1/2" (0.500 in) in Ti-6Al-4V Titanium Alloy (Grade 5)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining Ti-6Al-4V Titanium Alloy (Grade 5)?
Recent Calculations
No recent calculations saved yet.