Ti-6Al-4V Titanium Alloy (Grade 5) — 1" (1.000 in) 4-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling Ti-6Al-4V Titanium Alloy (Grade 5) with a 1" (1.000 in) 4-flute TiAlN carbide end mill, the recommended spindle speed is 815 RPM at 65 m/min (213.3 SFM), with a profiling feed rate of 160 mm/min (6.3 IPM) and adjusted chip load of 0.0492 mm/tooth, achieving a material removal rate of 38.71 cm³/min (2.36 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting MathTi-6Al-4V Titanium Alloy (Grade 5) (1" (1.000 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 25.4 mm | 12.7 mm | 1× | 52 | 2.1 | 16.77 | 0.98 |
| Slotting (100% WOC) | 3F | 25.4 mm | 12.7 mm | 1× | 78 | 3.1 | 25.16 | 1.47 |
| Slotting (100% WOC) | 4F | 25.4 mm | 12.7 mm | 1× | 104 | 4.1 | 33.55 | 1.96 |
| Profiling / HEM (25% WOC) | 2F | 6.35 mm | 38.1 mm | 1.1547× | 80 | 3.2 | 19.35 | 1.13 |
| Profiling / HEM (25% WOC) | 3F | 6.35 mm | 38.1 mm | 1.1547× | 120 | 4.7 | 29.03 | 1.69 |
| Profiling / HEM (25% WOC) CURRENT | 4F | 6.35 mm | 38.1 mm | 1.1547× | 160 | 6.3 | 38.71 | 2.26 |
| Adaptive Clearing (10% WOC) | 2F | 2.54 mm | 50.8 mm | 1.6667× | 116 | 4.6 | 14.97 | 0.87 |
| Adaptive Clearing (10% WOC) | 3F | 2.54 mm | 50.8 mm | 1.6667× | 174 | 6.8 | 22.45 | 1.31 |
| Adaptive Clearing (10% WOC) | 4F | 2.54 mm | 50.8 mm | 1.6667× | 231 | 9.1 | 29.81 | 1.74 |
Shop-Floor Machining Strategy for Ti-6Al-4V Titanium Alloy (Grade 5)
Work Hardening: HighHigh-Pressure Through-Spindle Flood Coolant (70 bar / 1000 PSI)
Pressure: 70 bar through-spindle coolant mandatory for deep milling
Titanium thermal conductivity is 1/6th of steel; heat cannot dissipate into chips and concentrates directly on the cutting edge. WARNING: Dry titanium chips present a combustible metal fire hazard.
Chip Flow: Chips weld chemically to tool steel and carbide at elevated temperatures.
Milling Direction: Strict climb milling. Keep radial engagement (ae) under 20% of tool diameter.
- LOW SPEED, HIGH FEED, ABUNDANT COOLANT: The universal titanium triad.
- Arc into cuts using a roll-in programmed entry; linear plunges cause tool shock fractures.
- Never dwell in the cut; program corner deceleration cautiously to prevent tool rubbing.
Frequently Asked CNC Questions (Ti-6Al-4V Titanium Alloy (Grade 5) / 1" (1.000 in))
What is the recommended RPM for milling Ti-6Al-4V Titanium Alloy (Grade 5) with a 1" (1.000 in) end mill?
What table feed rate and chip load should I program for 1" (1.000 in) in Ti-6Al-4V Titanium Alloy (Grade 5)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining Ti-6Al-4V Titanium Alloy (Grade 5)?
Recent Calculations
No recent calculations saved yet.