Polycarbonate (Lexan / PC Thermoplastic) — 5/8" (0.625 in) 3-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling Polycarbonate (Lexan / PC Thermoplastic) with a 5/8" (0.625 in) 3-flute TiAlN carbide end mill, the recommended spindle speed is 7,619 RPM at 380 m/min (1246.7 SFM), with a profiling feed rate of 1,808 mm/min (71.1 IPM) and adjusted chip load of 0.0791 mm/tooth, achieving a material removal rate of 170.9 cm³/min (10.42 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting MathPolycarbonate (Lexan / PC Thermoplastic) (5/8" (0.625 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 15.88 mm | 7.94 mm | 1× | 783 | 30.8 | 98.73 | 0.62 |
| Slotting (100% WOC) | 3F | 15.88 mm | 7.94 mm | 1× | 1,175 | 46.2 | 148.15 | 0.93 |
| Slotting (100% WOC) | 4F | 15.88 mm | 7.94 mm | 1× | 1,566 | 61.6 | 197.45 | 1.23 |
| Profiling / HEM (25% WOC) | 2F | 3.97 mm | 23.81 mm | 1.1546× | 1,205 | 47.4 | 113.9 | 0.71 |
| Profiling / HEM (25% WOC) CURRENT | 3F | 3.97 mm | 23.81 mm | 1.1546× | 1,808 | 71.1 | 170.9 | 1.07 |
| Profiling / HEM (25% WOC) | 4F | 3.97 mm | 23.81 mm | 1.1546× | 2,411 | 94.8 | 227.9 | 1.42 |
| Adaptive Clearing (10% WOC) | 2F | 1.59 mm | 31.75 mm | 1.6655× | 1,739 | 68.4 | 87.79 | 0.55 |
| Adaptive Clearing (10% WOC) | 3F | 1.59 mm | 31.75 mm | 1.6655× | 2,608 | 102.6 | 131.66 | 0.82 |
| Adaptive Clearing (10% WOC) | 4F | 1.59 mm | 31.75 mm | 1.6655× | 3,477 | 136.8 | 175.53 | 1.1 |
Shop-Floor Machining Strategy for Polycarbonate (Lexan / PC Thermoplastic)
Work Hardening: None (High internal residual stress from extrusion)Cold Air Blast Only or Pure Deionized Water
Pressure: Cold air gun at 5 bar
CRITICAL: Never expose polycarbonate to petroleum, synthetic cutting oils, or chemical solvents. Chemical exposure induces immediate catastrophic stress crazing and micro-fractures.
Chip Flow: Clean crisp plastic chips; air blast prevents chip recutting on optical surfaces.
Milling Direction: Climb milling mandatory to avoid chipping edge breakout.
- Maintain sharp high-rake tools; dull tools induce severe internal residual stress that causes delayed part cracking.
- Anneal machined parts at 120°C (250°F) for 2 hours if maximum impact strength is required.
- Use protective masking film on sheet surfaces to prevent surface scratches from chip wash.
Frequently Asked CNC Questions (Polycarbonate (Lexan / PC Thermoplastic) / 5/8" (0.625 in))
What is the recommended RPM for milling Polycarbonate (Lexan / PC Thermoplastic) with a 5/8" (0.625 in) end mill?
What table feed rate and chip load should I program for 5/8" (0.625 in) in Polycarbonate (Lexan / PC Thermoplastic)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining Polycarbonate (Lexan / PC Thermoplastic)?
Recent Calculations
No recent calculations saved yet.