Ti-6Al-4V Titanium Alloy (Grade 5) — 1/4" (0.250 in) 2-Flute Speeds & Feeds
Live CNC Milling Parameter Engine
For milling Ti-6Al-4V Titanium Alloy (Grade 5) with a 1/4" (0.250 in) 2-flute TiAlN carbide end mill, the recommended spindle speed is 3,258 RPM at 65 m/min (213.3 SFM), with a profiling feed rate of 106 mm/min (4.2 IPM) and adjusted chip load of 0.0162 mm/tooth, achieving a material removal rate of 1.6 cm³/min (0.1 in³/min).
Radial Engagement & Chip Thinning Blueprint
DIN 6584 / SandvikStep-by-Step Machining Physics Proof
DIN 6584 Cutting MathTi-6Al-4V Titanium Alloy (Grade 5) (1/4" (0.250 in)) Cutting Strategy Matrix
Pre-computed Speeds & Feeds across Slotting (100% ae), Profiling (25% ae), and Adaptive/HEM (10% ae).
| Operation Strategy | Flutes | Stepover (ae) | Depth (ap) | CTF | Feed (mm/min) | Feed (IPM) | MRR (cm³/min) | Power (kW) |
|---|---|---|---|---|---|---|---|---|
| Slotting (100% WOC) | 2F | 6.35 mm | 3.17 mm | 1× | 68 | 2.7 | 1.37 | 0.08 |
| Slotting (100% WOC) | 3F | 6.35 mm | 3.17 mm | 1× | 103 | 4 | 2.07 | 0.12 |
| Slotting (100% WOC) | 4F | 6.35 mm | 3.17 mm | 1× | 137 | 5.3 | 2.76 | 0.16 |
| Profiling / HEM (25% WOC) CURRENT | 2F | 1.59 mm | 9.52 mm | 1.1541× | 106 | 4.2 | 1.6 | 0.09 |
| Profiling / HEM (25% WOC) | 3F | 1.59 mm | 9.52 mm | 1.1541× | 158 | 6.3 | 2.39 | 0.14 |
| Profiling / HEM (25% WOC) | 4F | 1.59 mm | 9.52 mm | 1.1541× | 211 | 8.3 | 3.19 | 0.19 |
| Adaptive Clearing (10% WOC) | 2F | 0.64 mm | 12.7 mm | 1.6609× | 152 | 6 | 1.24 | 0.07 |
| Adaptive Clearing (10% WOC) | 3F | 0.64 mm | 12.7 mm | 1.6609× | 228 | 9 | 1.85 | 0.11 |
| Adaptive Clearing (10% WOC) | 4F | 0.64 mm | 12.7 mm | 1.6609× | 304 | 12 | 2.47 | 0.14 |
Shop-Floor Machining Strategy for Ti-6Al-4V Titanium Alloy (Grade 5)
Work Hardening: HighHigh-Pressure Through-Spindle Flood Coolant (70 bar / 1000 PSI)
Pressure: 70 bar through-spindle coolant mandatory for deep milling
Titanium thermal conductivity is 1/6th of steel; heat cannot dissipate into chips and concentrates directly on the cutting edge. WARNING: Dry titanium chips present a combustible metal fire hazard.
Chip Flow: Chips weld chemically to tool steel and carbide at elevated temperatures.
Milling Direction: Strict climb milling. Keep radial engagement (ae) under 20% of tool diameter.
- LOW SPEED, HIGH FEED, ABUNDANT COOLANT: The universal titanium triad.
- Arc into cuts using a roll-in programmed entry; linear plunges cause tool shock fractures.
- Never dwell in the cut; program corner deceleration cautiously to prevent tool rubbing.
Frequently Asked CNC Questions (Ti-6Al-4V Titanium Alloy (Grade 5) / 1/4" (0.250 in))
What is the recommended RPM for milling Ti-6Al-4V Titanium Alloy (Grade 5) with a 1/4" (0.250 in) end mill?
What table feed rate and chip load should I program for 1/4" (0.250 in) in Ti-6Al-4V Titanium Alloy (Grade 5)?
Why does radial chip thinning occur when milling at less than 50% stepover?
What coolant strategy is recommended for CNC machining Ti-6Al-4V Titanium Alloy (Grade 5)?
Recent Calculations
No recent calculations saved yet.